✦ LIBER ✦

Peculiarities of the glass transition temperature of binary polymeric systems: entropic and enthalpic treatments

✍ Scribed by Maria Cristina Righetti; Giuseppe Ajroldi; Giuseppe Marchionni; Giovanni Pezzin

Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 613 KB
Volume: 34
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(93)90193-e

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Specific heat peculiarities at the glass

Specific heat peculiarities at the glass transition of binary polymeric systems

✍ Maria Cristina Righetti; Giuseppe Ajroldi; Giovanni Pezzin 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 256 KB

Recently, it has been shown by our group that the composition dependence of the glass transition temperature (T,) of polymer-diluent (and polymer-polymer) systems has to be described, in some occasions, by two different analytical expressions, one applicable above and one below a critical temperatur

Glass transition of binary systems: pecu

Glass transition of binary systems: peculiarities at low temperature

✍ M.C Righetti; G Ajroldi; G Pezzin 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 588 KB

The influence of thermal properties on t

The influence of thermal properties on the glass transition temperature in styrene/divinylbenzene network–diluent systems

✍ T. S. Ellis; F. E. Karasz; G. Ten Brinke 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 534 KB

The depression of glass transition temperature in polystyrene and styrene/divinylbenzene networks, by the addition of ethylbenzene, ethyl acetate, and m-diethylbenzene, respectively, has been investigated by differential scanning calorimetry. The predictive quality of the Couchman-Karasz treatment f

Time and temperature effect on the linea

Time and temperature effect on the linear–nonlinear viscoelastic transition threshold of a polymeric system

✍ G. C. Papanicolaou; A. G. Xepapadaki; K. Karagounaki; S. P. Zaoutsos 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 699 KB

TTT-cure diagram of an anhydride-cured e

TTT-cure diagram of an anhydride-cured epoxy system including gelation, vitrification, curing kinetics model, and monitoring of the glass transition temperature

✍ H. Teil; S. A. Page; V. Michaud; J.-A. E. Månson 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 263 KB 👁 2 views

## Abstract The curing reaction of an epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] combined with a methyl‐hexahydrophtalic anhydride (MHHPA) hardener and a benzyldimethylamine (BDMA) accelerator was studied over a temperature range of 60–140°C to build its isothermal time‐temperature‐trans

Effects of chemical structure of polyure

Effects of chemical structure of polyurethane-based low-profile additives on the miscibility, curing behavior, volume shrinkage, glass transition temperatures, and mechanical properties for styrene/unsaturated polyester/low-profile additive ternary systems. II: Glass transition temperatures and mechanical properties

✍ Yan-Jyi Huang; Shwu-Chyn Lee; Jyh-Ping Dong 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 218 KB 👁 2 views