✦ LIBER ✦

Peculiarities of machining components on NC lathes and milling machines

✍ Scribed by E. P. Kvasov; Yu. M. Khomaza; I. M. Yunak; S. G. Dotsenko

Publisher: Springer
Year: 1984
Tongue: English
Weight: 236 KB
Volume: 20
Category: Article
ISSN: 0009-2355
DOI: 10.1007/bf01149058

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cutting conditions for lathe turning and

Cutting conditions for lathe turning and machine milling of glass

✍ V. A. Fedotov 📂 Article 📅 1956 🏛 Springer US 🌐 English ⚖ 686 KB

Design and NC Machining of Concave-Arc B

Design and NC Machining of Concave-Arc Ball-End Milling Cutters

✍ W.-F. Chen; C.-K. Chen; H.-Y. Lai 📂 Article 📅 2002 🏛 Springer 🌐 English ⚖ 209 KB

Development of Technology and Strategies

Development of Technology and Strategies for the Machining of Ceramic Components by Sinking and Milling EDM

✍ B. Lauwers; J.-P. Kruth; K. Brans 📂 Article 📅 2007 🏛 International Academy for Production Engineering 🌐 English ⚖ 504 KB

This paper investigates the manufacturability of B 4 C, SiC, Si 3 N 4 -TiN by milling EDM and the performance of it has been compared to conventional sinking EDM. It is shown that due to the good flushing conditions, milling EDM performs well, even for the machining of ceramic materials with a rathe

Design and manufacturing of parts for fu

Design and manufacturing of parts for functional prototypes on five-axis milling machines

✍ Tammam Salloum; Bernard Anselmetti; Kwamivi Mawussi 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 732 KB

Optimising Tool Positioning for End-Mill

Optimising Tool Positioning for End-Mill Machining of Free-Form Surfaces on 5-Axis Machines for both Semi-Finishing and Finishing

✍ J.-M. Redonnet; W. Rubio; F. Monies; G. Dessein 📂 Article 📅 2000 🏛 Springer 🌐 English ⚖ 164 KB

A system for recognition and modificatio

A system for recognition and modification of machining features on prismatic components

✍ Park, M. W. ;Ko, H. ;Sohn, Y. ;Kang, H. 📂 Article 📅 1994 🏛 Springer-Verlag ⚖ 523 KB