✦ LIBER ✦

Particle velocity measurements in a circulating fluidized bed

✍ Scribed by T. Wang; Z. J. Lin; C. M. Zhu; D. C. Liu; S. C. Saxena

Publisher: American Institute of Chemical Engineers
Year: 1993
Tongue: English
Weight: 449 KB
Volume: 39
Category: Article
ISSN: 0001-1541
DOI: 10.1002/aic.690390818

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of membrane walls on particle

Influence of membrane walls on particle dynamics in a circulating fluidized bed

✍ J. Zhou; J. R. Grace; C. M. H. Brereton; C. J. Lim 📂 Article 📅 1996 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 348 KB 👁 2 views

Membrane walls composed of vertical tubes connected by fins, as shown in Figure , are commonly employed as heattransfer surfaces to remove heat from circulating-fluidized bed (CFB) combustors. The riser reactors are rectangular or square in cross section. The membrane tubes influence the dynamics of

Experimentally measured shear stress in

Experimentally measured shear stress in the standpipe of a circulating fluidized bed

✍ Angela Sarra; Aubrey L. Miller; Lawrence J. Shadle 📂 Article 📅 2005 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 292 KB 👁 1 views

Attrition of Particles in Fluidized Beds

✍ Janitza Rangelova; Jürgen Dalichau; Stefan Heinrich; Lothar Mörl 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 German ⚖ 60 KB 👁 1 views

Numerical computation of a circulating f

Numerical computation of a circulating fluidized bed combustor

✍ Lu Huilin; Bie Rushan; Yang Lidan; Zhao Guangbo; Tan Xiu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 148 KB 👁 1 views

A mathematical model to describe a circulating fluidized-bed combustor is presented. A modified two-phase model which was used in the bubbling fluidized-bed combustor is considered to simulate the dense zone of the bottom section. For the upper section of the bed the momentum and energy-balance equa

Gas dispersion in downflowing high veloc

Gas dispersion in downflowing high velocity fluidized beds

✍ Chunshe Cao; Herbert Weinstein 📂 Article 📅 2000 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 133 KB 👁 1 views

Critical Bed Height for Solid Circulatio

Critical Bed Height for Solid Circulation in a Compartmented Gas-Fluidized Bed

✍ B. Bhattacharya; D. Sathiyamoorthy; V. Govardhana Rao; S. P. Mahajan 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB 👁 1 views

The influence of design and operating parameters on minimum upstream bed height required for steady solid circulation across a compartmented gas-fluidized bed has been studied. The partition plate in the compartmented bed is fitted with two pairs of Vvalve and riser with orifices in them. Silica san