✦ LIBER ✦

Partial oxidation of CH4 in solid oxide fuel cells: simulation model of the electrochemical reactor and experimental validation

✍ Scribed by P. Costamagna; E. Arato; P.L. Antonucci; V. Antonucci

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 411 KB
Volume: 51
Category: Article
ISSN: 0009-2509
DOI: 10.1016/0009-2509(96)00190-x

No coin nor oath required. For personal study only.

✦ Synopsis

The practicability of using a substoichiometric mixture of air and methane to feed the anode compaflnmat of a solid oxide electrochemical reactor has been tested at laboratory level tlwougb the operation ofa 150W tubular stack. Fuel is partially oxidized to synthesis gas as an alternative to steam refonning of natural gas in solid oxide fuel cells. A simulation model of the electrochemical reactor, including mass, heat and charge balances is presented. Experimental resulls confirm the simulation ones and the model gives new insights into the phenomenological behaviour of the whole process.

📜 SIMILAR VOLUMES

Solid Oxide Fuel Cell Cathodes: Polariza

Solid Oxide Fuel Cell Cathodes: Polarization Mechanisms and Modeling of the Electrochemical Performance

✍ Juergen Fleig 📂 Article 📅 2003 🏛 John Wiley and Sons ⚖ 50 KB 👁 2 views

Performance of Alternative Oxide Anodes

Performance of Alternative Oxide Anodes for the Electrochemical Oxidation of Hydrogen and Methane in Solid Oxide Fuel Cells

✍ H. Tu; H. Apfel; U. Stimming 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 280 KB 👁 2 views

## Abstract The electrode performances of the alternative oxides: La~0.05~Ca~0.95~Cr~0.05~Ti~0.95~O~3‐δ~‐8YSZ and Ce~0.8~TM~0.2~O~2‐δ~(TM=Mn, Co) for the direct electrochemical oxidation of methane are investigated to assess their potential as anode materials for efficient methane conversion in a S

Correlation model of mixed ionic–electro

Correlation model of mixed ionic–electronic conductivity in solid oxide lattices in the presence of point and line defects for solid oxides fuel cells

✍ Sebastiano Tosto 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 332 KB 👁 1 views

ChemInform Abstract: Characterization, M

ChemInform Abstract: Characterization, Modeling, and Optimization of Transport and Reaction Processes in the Porous Solid Oxide Fuel Cell Anode

✍ Kyle N. Grew; Jr. Izzo; John R.; Abhijit S. Joshi; Aldo A. Peracchio; Wilson K. 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 15 KB 👁 1 views

Effect of Ethane and Propane in Simulate

Effect of Ethane and Propane in Simulated Natural Gas on the Operation of Ni–YSZ Anode Supported Solid Oxide Fuel Cells

✍ D. M. Bierschenk; M. R. Pillai; Y. Lin; S. A. Barnett 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 420 KB 👁 2 views

## Abstract Solid oxide fuel cells with Ni–yittria‐stabilised zirconia (YSZ) anode supports were tested on surrogate natural gas fuels (methane containing 2.5–10% ethane and 1.25–5% propane) and compared with results for pure methane. Inert anode‐side diffusion barriers were found to help suppress

A Depth-Resolved In-Situ Study of the Re

A Depth-Resolved In-Situ Study of the Reduction and Oxidation of Ni-Based Anodes in Solid Oxide Fuel Cells

✍ A. Hagen; H. F. Poulsen; T. Klemensø; R. V. Martins; V. Honkimäki; T. Buslaps; R 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB 👁 1 views

## Abstract The stability of Ni‐YSZ anodes as part of solid oxide fuel cells (SOFCs) towards redox cycling is an important issue for successfully introducing the technology. Detailed knowledge of the NiO‐Ni transitions and their impact on the mechanical integrity of the whole system is necessary to