Bechtel Group, Incorporated, undertook a comprehensive parametric technical and economic study of seawater reverse osmosis (RO) desalination plants. The objective was to derive updated costs for plants ranging from 100,000 gpd to 5 million gpd at a Caribbean site and at a continental U.S. site. The
Parametric study on falling-film seawater desalination
β Scribed by G. Aly; A. Al-Haddad; M. Abdel-Jawad
- Publisher
- Elsevier Science
- Year
- 1987
- Tongue
- English
- Weight
- 510 KB
- Volume
- 65
- Category
- Article
- ISSN
- 0011-9164
No coin nor oath required. For personal study only.
β¦ Synopsis
A computer program "as constructed for the calculation of the heat transfer and fluid hydrodynamic characteristics of falling-film evaporation of natural seawater. The evaporator unit is provided with a recirculation loop. The heat transfer surface is divided into small segments where local heat transfer coefficients are calculated using correlations for different flow regimes.
The package has been optimized with respect to convergence, accuracy and CPU time consumption. A parametric study "as conducted to investigate the effect of such process variables as feed conditions, steam temperature, circulation ratio, boiling temperature and fouling thermal resistance. The results of an extensive sensitivity analysis indicate that the evaporation process is more sensitive to changes in the thickness of the scale layer and live steam temperature and less sensitive to changes in feed temperature.
π SIMILAR VOLUMES
study of the inception and growth of waves on falling liquid films is reported. Two new experimental techniques were used: I. The instantaneous sampling of the varying film thickness at fixed points at the wetted wall using a light absorption method. The information from the digitised sampling unit
A mathematical model was applied to falling film absorption outside the smooth and chute low-ribbed tubes to analyze the heat and mass transfer in the absorber. The liquid film outside tubes was assumed to consist of two layers, i.e., internal and external layers. A numerical calculation method was