๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Parametric studies of wall heat transfer in a fluidized bed circulating through a packed bed

โœ Scribed by V. R. Raghavan


Publisher
Springer-Verlag
Year
1989
Tongue
English
Weight
617 KB
Volume
24
Category
Article
ISSN
1432-1181

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Numerical modeling of axial bed-to-wall
โœ Nirmal V. Gnanapragasam; Bale V. Reddy ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 478 KB

The water-wall surfaces located above the secondary air inlet within the circulating fluidized bed (CFB) combustor are exposed to the axial bed-to-wall heat transfer process. In the current work, the axial bedto-wall heat transfer coefficients are estimated for three different axial voidage profiles

Axial and radial heat transfer studies i
โœ B. V. Reddy; P. K. Nag ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 466 KB ๐Ÿ‘ 2 views

The axial and radial variation of the heat transfer coefficient in a circulating fluidized bed riser column, and the effect of operating parameters thereon, are investigated. The experimental set-up consists of a riser column of 102 mm;102 mm in bed cross-section, 5โ€ข25 m in height with a return leg

Suspension-to-wall heat transfer in a 12
โœ M. R. Golriz ๐Ÿ“‚ Article ๐Ÿ“… 1996 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 625 KB

An experimental investigation was carried out to study the effects of operating parameters on the local suspensionto-wall heat transfer in the combustor of a 12-MWt, circulating fluidized-bed (CFB) boiler. The heat transfer coefficients were measured with a conduction-type heat flux meter at five di