✦ LIBER ✦

Parametric analysis of direct contact sensible heat transfer in spray columns

✍ Scribed by P. Battya; Vijay R. Raghavan; K.N. Seetharamu

Publisher: Elsevier Science
Year: 1982
Weight: 402 KB
Volume: 9
Category: Article
ISSN: 0094-4548
DOI: 10.1016/0094-4548(82)90035-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

An analytic model of direct-contact heat

An analytic model of direct-contact heat transfer in spray-column evaporators

✍ Yasuhiko H. Mori 📂 Article 📅 1991 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 701 KB

A theoretical analysis of direct contact

A theoretical analysis of direct contact evaporation in spray columns

✍ P. Battya; V.R. Raghavan; K.N. Seetharamu 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 365 KB

Determining Optimum Column Height in Dir

Determining Optimum Column Height in Direct-Contact Heat Transfer Columns

✍ Lench, M.J. ;Worthington, H. 📂 Article 📅 2008 🏛 Curtin University of Technology 🌐 English ⚖ 596 KB

Direct contact heat transfer with change

Direct contact heat transfer with change of phase: Spray-column studies of a three-phase heat exchanger

✍ Samuel Sideman; Yehuda Gat 📂 Article 📅 1966 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 967 KB

Parametric analysis of direct contact ev

Parametric analysis of direct contact evaporation process in a bubble column

✍ M. Song; A. Steiff; P.-M. Weinspach 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 867 KB

This paper presents a detailed analysis of the influence of several important parameters, such as the breakage of droplets, the driving temperature difference, the initial mean diameter of drops from the bottom distributor, and the maximum diameter of stable drobbles on the direct-contact evaporatio

The mechanism of heat transfer in a spra

The mechanism of heat transfer in a spray column heat exchanger

✍ Ruth Letan; Ephraim Kehat 📂 Article 📅 1968 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 710 KB

a spray column Temperature profiles of dispersed kerosene and water were measured in I heat exchanger,. 15 cm. in diameter and 160 cm. long. Dispersed packing of drops and narrow temperoture ranges were used. The flow rates used were 0 to 50 liters/min. of water ond 5 to 40 liters/min. of kerosene.