𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Oxygen microwave plasma treatment of silicone elastomer: Kinetic behavior and surface composition

✍ Scribed by Björn Olander; Anders Wirsén; Ann-Christine Albertsson

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
199 KB
Volume
91
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microwave plasma surface modification of
Microwave plasma surface modification of silicone elastomer with allylamine for improvement of biocompatibility
✍ T. B. Ren; Th. Weigel; Th. Groth; A. Lendlein 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 941 KB

## Abstract The microwave plasma surface modification of silicone elastomer with allylamine was studied to improve the biocompatibility of the material. An effort was made to clarify the relationships among plasma conditions and surface chemical composition, physical surface properties and biocompa

Filler–elastomer interactions: influence
Filler–elastomer interactions: influence of oxygen plasma treatment on surface and mechanical properties of carbon black/rubber composites
✍ Soo-Jin Park; Ki-Sook Cho; Seung-Kon Ryu 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 209 KB

In this work, the influence of oxygen plasma treatment on the surface and adsorption properties of carbon blacks was investigated using X-ray photoelectron spectroscopy (XPS), z-potential, and BET isotherms. Then the mechanical properties [tensile strength and tearing energy (G )] of carbon black /

Surface modification of carbon/epoxy pre
Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites
✍ M.H. Kim; K.Y. Rhee; H.J. Kim; D.H. Jung 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 689 KB

It was shown in previous study that the fracture toughness of carbon/epoxy laminated composites could be significantly improved by modifying the surface of the prepreg using Ar + irradiation in an oxygen environment. In this study, the surface of carbon/epoxy prepreg was modified using an oxygen pla