𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Oxide Fiber Reinforced Glass: a Challenge to New Composites

✍ Scribed by T. Leutbecher; D. Hülsenberg

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
493 KB
Volume
2
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties of glass fiber and
Mechanical properties of glass fiber and liquid crystalline polymer reinforced polypropylene hybrid composites toughened with elastomers
✍ S. C. Tjong; S. A. Xu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 327 KB 👁 2 views

## Abstract A group of short glass fiber (SGF) and liquid crystalline polymer (LCP) reinforced polypropylene (PP) hybrid composites and toughened with maleic anhydride (MA)‐grafted styrene–ethylene butylene–styrene (SEBS‐__g__‐MA) elastomers with controlled morphology were designed and injection mo

Adherence ofStreptococcus mutans to an E
Adherence ofStreptococcus mutans to an E-glass fiber-reinforced composite and conventional restorative materials used in prosthetic dentistry
✍ Tanner, Johanna ;Vallittu, Pekka K. ;S�derling, Eva 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB 👁 1 views

The adherence of Streptococcus mutans to E-glass used in fiber-reinforced composites, denture base polymer, and four other restoratives was investigated. The materials were studied with and without a parotid saliva and serum pellicle. Specimens of the studied materials (E-glass, denture base polymer

New approach to fabricate densificated c
New approach to fabricate densificated continuous fiber reinforced polytetrafluoroethylene composites with significantly improved interfacial bonding and mechanical properties
✍ Aijuan Gu; Guozheng Liang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 166 KB 👁 1 views

## Abstract An unique two‐step technique to fabricate densified continuous fiber reinforced polytetrafluoroethylene (PTFE) composites with significantly improved interfacial bonding and mechanical properties have been successfully developed. The technique is conventional sintering followed by resin

Processability and mechanical performanc
Processability and mechanical performance of hybrid composites based on poly(ether sulfone) modified with a glass fiber–reinforced liquid crystalline polymer
✍ M. García; J. I. Eguiazábal; J. Nazábal 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 278 KB 👁 2 views

## Abstract Hybrid composites, based on poly(ether sulfone) (PES) and glass fiber–reinforced copolyester liquid crystalline polymer (gLCP) up to 40% gLCP, were obtained by injection molding: these polymers were immiscible. Despite its higher viscosity, the gLCP acted as a processing aid for PES. Th

Preparation of polyamide resin-encapsula
Preparation of polyamide resin-encapsulated melamine cyanurate/melamine phosphate composite flame retardants and the fire-resistance to glass fiber-reinforced polyamide 6
✍ Yuan Liu; Qi Wang; Guoxia Fei; Yinghong Chen 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 362 KB 👁 2 views

## Abstract In this study, melamine cyanurate (MCA)/melamine phosphate (MP) composite flame retardants were synthesized in the solution of phosphoric acid/polyamide 6 (PA6). Phosphoric acid acted as the solvent of PA6, catalyst of melamine‐cyanurate self‐assembly reaction and reactant of melamine‐p