Drying and devolatilization are studied at combustion temperatures. The surface temperature of particles at the end of drying can significantly exceed the temperature when devolatilization starts, implying that drying and pyrolysis may partly overlap. Devolatilization is controlled by heat transfer,
Oxidative pyrolysis of solid fuels
โ Scribed by Osvalda Senneca; Riccardo Chirone; Piero Salatino
- Publisher
- Elsevier Science
- Year
- 2004
- Tongue
- English
- Weight
- 262 KB
- Volume
- 71
- Category
- Article
- ISSN
- 0165-2370
No coin nor oath required. For personal study only.
โฆ Synopsis
This study addresses the dependence of the rate and pattern of pyrolysis of solid fuels from the oxidizing versus inert nature of the gaseous atmosphere. A selection of four solid fuels is considered in the study, namely two plastics (polyethylene and polyethylene terephthalate), one lignocellulosic material (Robinia Pseudoacacia) and a South African bituminous coal. Fuels are pyrolyzed in a thermogravimetric apparatus at different heating rates, under inert conditions or in the presence of oxygen at different concentration.
Results indicate that the action exerted by oxygen during pyrolysis depends on the nature of the fuel and on the process conditions such as heating rate and oxygen concentration. Larger heating rates and larger oxygen concentration may indeed emphasize differences between inert and oxidative pyrolysis. Further analysis is directed to check the adequacy of a power low kinetic expression to describe the dependence of the rate of oxidative pyrolysis from the level of oxygen concentration.
๐ SIMILAR VOLUMES
A vaporization step is assumed to occur inside particles during isothermal pyrolysis reactions. An intraparticle mass transfer model is developed which incorporates this vaporization mechanism together with pore expansion and convective flow. The basic model concepts should be applicable to a wide r
## Abstract For Abstract see ChemInform Abstract in Full Text.