✦ LIBER ✦

Oxidative coupling of methane overSrF2/Y2O3 catalyst

✍ Scribed by R.Q. Long; H.L. Wan

Book ID: 108471580
Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 721 KB
Volume: 159
Category: Article
ISSN: 0926-860X
DOI: 10.1016/s0926-860x(97)00047-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Methane oxidative coupling on BaF2LaOF c

Methane oxidative coupling on BaF2LaOF catalyst

✍ Zi Sheng Chao; Xiao Ping Zhou; Hui Lin Wan; Khi Rui Tsai 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 326 KB

Oxidative coupling of methane over NaLa

Oxidative coupling of methane over NaLa2O3 catalysts

✍ J. Barrault; C. Grosset; M. Hadj.Aissa; M. Dion; M. Tournoux 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 406 KB

Mechanistic study of oxidative coupling

Mechanistic study of oxidative coupling of methane over Mn2O3Na2WO4SiO2 catalyst

✍ Jingang Wu; Shuben Li; Jianzhong Niu; Xueping Fang 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 682 KB

Oxidative coupling of methane over vapou

Oxidative coupling of methane over vapour deposited Sm2O3

✍ E.Y. Gankina; G.S. Salitra; Y.G. Borodko 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 118 KB

Oxidative Coupling of Methane over W-Mn/

Oxidative Coupling of Methane over W-Mn/SiO2 Catalyst

✍ Shu-Ben Li 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 370 KB

## Abstract W‐Mn/SiO~2~ catalyst has been developed in our laboratory (LICP), which is active, selective and stable for oxidative coupling of methane (OCM) in fixed bed and fluidized bed reactors. The research results have been reproduced at different reaction conditions by two groups of J. H. Luns

Modeling of catalytic reactor for oxidat

Modeling of catalytic reactor for oxidative coupling of methane using La2O3/CaO catalyst

✍ Ching Thian Tye; Abdul Rahman Mohamed; Subhash Bhatia 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 234 KB

A one-dimensional model for the oxidative coupling of methane (OCM) over La 2 O 3 /CaO catalyst in fixed bed reactor has been developed. This model was tested for isothermal, adiabatic and non-isothermal operation modes. The parameters studied were methane to oxygen (CH 4 /O 2 ) ratio, temperature,