✦ LIBER ✦

Oxidation behavior of PAN based carbon fiber reinforced phenolic resin matrix composites

✍ Scribed by S. R. Dhakate; P. Bahl; P. D. Sahare

Book ID: 110241273
Publisher: Springer
Year: 2000
Tongue: English
Weight: 56 KB
Volume: 19
Category: Article
ISSN: 0261-8028
DOI: 10.1023/a:1006792223737

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Interfacial Characteristics and Fracture

Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-Plated Carbon Fiber-Reinforced Phenolic Resin Matrix Composites

✍ Soo-Jin Park; Yu-Sin Jang 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 147 KB

The electrolytic plating of metallic nickel on a carbon fiber surface has been carried out in order to improve the interfacial adhesion and the mechanical properties in carbon fiber/phenolic matrix composite systems. The surface and the mechanical interfacial properties of composites are characteriz

Measurement and analytical validation of

Measurement and analytical validation of interfacial bond strength of PAN-fiber-reinforced carbon matrix composites

✍ Jale Tezcan; Soydan Ozcan; Bijay Gurung; Peter Filip 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 523 KB

Fracture behavior of vinylester resin ma

Fracture behavior of vinylester resin matrix composites reinforced with alkali-treated jute fibers

✍ Dipa Ray; B. K. Sarkar; A. K. Rana 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB 👁 2 views

## Abstract Jute fibers were treated with 5% NaOH solution for 4 and 8 h, respectively, to study the mechanical and impact fatigue properties of jute‐reinforced vinylester resin matrix composites. Mechanical properties were enhanced in case of fiber composites treated for 4 h, where improved interf

A study of pyrolysis of phenolic resin r

A study of pyrolysis of phenolic resin reinforced with carbon fibres and oxidized pan fibres

✍ Vesna Marković; Slobodan Marinković 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 948 KB

## Pyrolysis of composites prepared from a phenol-formaldehyde resin and carbon fibres (CFRC) or oxidized PAN fibres (OFRC) has been investigated up to 1270 K. Two temperature regions can be distinguished in the pyrolysis of the CFRC: below 770 K the carbon fibres hold the composite structure resi

Effect of phenolic resin content on perf

Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material

✍ Jie Fei; He-Jun Li; Ye-Wei Fu; Le-Hua Qi; Yu-Lei Zhang 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 657 KB

Carbon fiber reinforced paper-based friction (CFRPF) material is a new type wet friction material which has been used in automatic transmission. In this study, four kinds of CFRPF were prepared by papermaking process with cashew-modified phenolic resin. The resin contents ranged from 35 wt.% to 50 w

Effect of Fiber–Polymer Interactions on

Effect of Fiber–Polymer Interactions on Fracture Toughness Behavior of Carbon Fiber-Reinforced Epoxy Matrix Composites

✍ Soo-Jin Park; Mun-Han Kim; Jae-Rock Lee; Sunwoong Choi 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 80 KB

The effect of anodic oxidation on high-strength polyacrylonitrilebased carbon fibers has been studied in terms of fiber surface energetics and fracture toughness of the composites. According to contact angle measurements based on the wicking rate of a test liquid, anodic oxidation leads to an increa