𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Oriented TiO2 Nanostructured Pillar Arrays: Synthesis and Characterization

✍ Scribed by Federico Cesano; Serena Bertarione; Alessandro Damin; Giovanni Agostini; Sandro Usseglio; Jenny G. Vitillo; Carlo Lamberti; Giuseppe Spoto; Domenica Scarano; Adriano Zecchina

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
684 KB
Volume
20
Category
Article
ISSN
0935-9648

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Preparation and Characterization of Nano
Preparation and Characterization of Nanostructured TiO2/Epoxy Polymeric Films
✍ Marco Sangermano; Giulio Malucelli; Ezio Amerio; Roberta Bongiovanni; Aldo Priol πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 270 KB

## Abstract **Summary:** Titania‐containing coatings were prepared by cationic photopolymerization of an epoxy resin either by dispersion of preformed TiO~2~ nanoparticles or by their in‐situ generation through a sol‐gel dual‐cure process. The kinetics of photopolymerization was evaluated by real‐t

Characterization of Pore Structure and C
Characterization of Pore Structure and Coordination of Titanium in TiO2 and SiO2–TiO2 Sol-Pillared Clays
✍ Z. Ding; H.Y. Zhu; P.F. Greenfield; G.Q. Lu πŸ“‚ Article πŸ“… 2001 πŸ› Elsevier Science 🌐 English βš– 95 KB

Titania sol-pillared clay (TiO 2 PILC) and silica-titania solpillared clay (SiO 2 -TiO 2 PILC) were synthesized by the sol-gel method. Supercritical drying (SCD) and treatment with quaternary ammonium surfactants were used to tailor the pore structure of the resulting clay. It was found that SCD app

Gas-Phase Synthesis of Nanostructured An
Gas-Phase Synthesis of Nanostructured Anatase TiO2
✍ Albert Goossens; Edward-Louis Maloney; Joop Schoonman πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 888 KB

Nanostructured anatase titanium dioxide (TiO 2 ) has been obtained using chemical vapor deposition (CVD). In order to arrive at a fractal-type morphology, two different titanium precursors were injected simultaneously into a cold-wall CVD system. With this method, a wide variety of morphologies can