✦ LIBER ✦

Orientation and mechanical properties of polycarbonate- linear low density polyethylene blends

✍ Scribed by Abdellah Ajji

Publisher: Society for Plastic Engineers
Year: 1989
Tongue: English
Weight: 727 KB
Volume: 29
Category: Article
ISSN: 0032-3888
DOI: 10.1002/pen.760292109

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties of blends of low d

Mechanical properties of blends of low density with linear low density polyethylene

✍ F.P. La Mantia; D. Acierno 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 178 KB

Torque values and mechanical properties are reported for blends of low density with linear low density polyethylene (PE). The torque values show that incompatible mixtures in the molten state are formed when the torques of the pure polymers are almost equal. Semicompatible behaviour is shown in the

Thermal and mechanical properties of lin

Thermal and mechanical properties of linear low-density polyethylene/low-density polyethylene/wax ternary blends

✍ A. S. Luyt; M. J. Hato 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB 👁 2 views

Mechanical properties of uncrosslinked a

Mechanical properties of uncrosslinked and crosslinked linear low-density polyethylene/wax blends

✍ I. Krupa; A. S. Luyt 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 178 KB 👁 1 views

Mechanical and flow properties of high-d

Mechanical and flow properties of high-density polyethylene/low-density polyethylene blends

✍ Andres Garcia-Rejon; C. Alvarez 📂 Article 📅 1987 🏛 Society for Plastic Engineers 🌐 English ⚖ 482 KB

Mechanical properties of polystyrene/low

Mechanical properties of polystyrene/low density polyethylene blends

✍ W.M. Barentsen; D. Heikens 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Mechanical properties and morphology of

Mechanical properties and morphology of polylactide, linear low-density polyethylene, and their blends

✍ Gursewak Singh; H. Bhunia; Anita Rajor; R. N. Jana; Veena Choudhary 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 752 KB

## Abstract Melt blending of linear low density polyethylene (LLDPE) and polylactide (PLA) was performed in an extrusion mixer with post extrusion blown film attachment with and without compatibilizer‐grafted low density polyethylene maleic anhydride. The blend compositions were optimized for tensi