✦ LIBER ✦

Optimized heat exchange extends seal life

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 245 KB
Volume: 1997
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(97)88216-5

No coin nor oath required. For personal study only.

✦ Synopsis

The fibre reinforced formulation in non-staining white or high-purity graphite forms a homogenous sealing mass. In operation, the sealant clings to the shaft or sleeve on the inside diameter, and to the stuffing box wall on the outside diameter. The sealant is designed to experience Internal Laminar Shear, so that relative rotation takes place within the sealant, not against the rotating member. Equipment is protected from the aggressive fretting common with conventional packings.

CMS-2000 is provided in stick and bulk form for initial stuffing box loading and in cartrdges for final sealing under pressure to eliminate voids. Cartridges are then used for all subsequent resealing. Operating parameters are up to 400°F, and 2000 fpm.

📜 SIMILAR VOLUMES

Chamber extends seal life

📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 493 KB

Seat exceeds Clamp seals

PTFE seal extends bearing life

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 345 KB

## Dynamic sealing Bufferpac, BW/IP

Seal and bearing care extends life

✍ Phil Burge 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 915 KB

Method for extending heat exchanger and

Method for extending heat exchanger and condenser life

✍ Clifford P. Tallman Sr. 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 573 KB

New material extends seal life in aerosp

New material extends seal life in aerospace applications

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 94 KB

## Asbestos ban opens new doors The move away from asbestos in Japan has provided an opportunity to European and US companies, and one example is Flexitallic. The company was set a challenge to provide a cost-effective Flexpro, Kammprofile style, gasket. For the initial period of changeover, the 1

Labyrinth seals extend bearing life

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 123 KB

## Dynamic sealing No oil seals are required and there is no need to empty out the oil from the transformer when disconnecting for routine maintenance and inspection. It also becomes possible to carry out a capacitance check on the connector while it is live on the transformer.