✦ LIBER ✦

Optimization of tool geometry parameters for turning operations based on the response surface methodology

✍ Scribed by Süleyman Neşeli; Süleyman Yaldız; Erol Türkeş

Book ID: 108206230
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 790 KB
Volume: 44
Category: Article
ISSN: 0263-2241
DOI: 10.1016/j.measurement.2010.11.018

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of turning parameters for s

Optimization of turning parameters for surface roughness and tool life based on the Taguchi method

✍ Ahmet Hasçalık; Ulaş Çaydaş 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 597 KB

Finite element optimization of diamond t

Finite element optimization of diamond tool geometry and cutting-process parameters based on surface residual stresses

✍ W. J. Zong; D. Li; K. Cheng; T. Sun; Y. C. Liang 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 451 KB

Optimization of operating parameters for

Optimization of operating parameters for supercritical carbon dioxide extraction of lycopene by response surface methodology

✍ Wen Huang; Zhenshan Li; Hai Niu; Dan Li; Jin Zhang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 373 KB

Chemometric tools in electroanalytical c

Chemometric tools in electroanalytical chemistry: Methods for optimization based on factorial design and response surface methodology

✍ César Ricardo Teixeira Tarley; Gustavo Silveira; Walter Nei Lopes dos Santos; Ge 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 251 KB

Response surface optimization of the ope

Response surface optimization of the operating parameters for a complex distillation column based on process simulation

✍ Honghai Wang; Xiaoying Cui; Rongliang Wang; Chunli Li 📂 Article 📅 2012 🏛 Elsevier ⚖ 403 KB

Investigating the machinability evaluati

Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology

✍ Jenn-Tsong Horng; Nun-Ming Liu; Ko-Ta Chiang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 985 KB

In this study a series of tests were conducted in order to investigate the machinability evaluation of Hadfield steel in the hard turning. The austenitic Hadfield steels, containing about 1.0-1.2% C and 11-14% Mn in mass, have excellent wear-resistance property and are extensively used in various en