✦ LIBER ✦

Optimization of RTM processing parameters for Class A surface finish

✍ Scribed by Genevieve Palardy; Pascal Hubert; Mohsan Haider; Larry Lessard

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 684 KB
Volume: 39
Category: Article
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2007.12.003

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of process parameter of res

Optimization of process parameter of residual stresses for hard turned surfaces

✍ Zhang Xueping; Gao Erwei; C. Richard Liu 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 848 KB

Hard turning has been recognized as a substitute for abrasive-based processes due to its operational flexibility, economic benefit, and low environmental impact. Besides these advantages, hard turning can induce compressive residual stresses, which increase the fatigue life of the workpiece. In this

Estimation of optimal parameters for a s

Estimation of optimal parameters for a surface hydrology model

✍ Luther W. White; Baxter Vieux; David Armand; Francois X. LeDimet 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 185 KB

An optimal control problem for a class o

An optimal control problem for a class of distributed parameter systems

✍ D.J. Ball; J.R. Hewit 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 413 KB

The optimal control of a class of linear deterministic time-invariant multi-dimensional distributed systems is considered. The unconstrained optimal control problem is formulated as a quadratic minimisation in a real Hilbert space. A conjugate gradient minimisation technique is employed in its solut

Estimation of process parameters on a mo

Estimation of process parameters on a moving horizon for a class of distributed parameter systems

✍ Stephan Studener; Khaled Habaieb; Boris Lohmann; Roland Wolf 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 418 KB

Use of response surface methodology for

Use of response surface methodology for optimizing process parameters for the production of α-amylase by Aspergillus oryzae

✍ Febe Francis; Abdulhameed Sabu; K.Madhavan Nampoothiri; Sumitra Ramachandran; Sa 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 577 KB

Optimization of three parameters (incubation temperature, initial substrate moisture and inoculum size) was attempted by using a Box-Behnken design under the response surface methodology for the optimal production of ␣-amylase by Aspergillus oryzae NRRL 6270 in solid-state fermentation (SSF). Spent

Optimal control for a class of distribut

Optimal control for a class of distributed parameter systems where the cost functions are norms

✍ Y. Yavin 📂 Article 📅 1969 🏛 Elsevier Science 🌐 English ⚖ 390 KB

Some problems in optimal control, for a class of linear distributed parameter systems, are posed. By using a theorem of approximation theory, a maximum principle, which is applicable to these optimal control problems, is given. It is shown, that for the problems posed in this paper, this maximum pri