𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Optimization of Galvannealing Parameters through Numerical Modeling of Galvannealing Process

✍ Scribed by A. K. Verma; Sanjay Chandra; N. Bandyopadhyay; B. K. Dhindaw; R. D. K. Misra

Publisher
The Minerals, Metals & Materials Society
Year
2009
Tongue
English
Weight
394 KB
Volume
40
Category
Article
ISSN
1073-5623

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Numerical treatment of the galvannealing
Numerical treatment of the galvannealing process
✍ A.K. Verma; S. Chandra; B.K. Dhindaw; R.D.K. Misra πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 246 KB

A numerical model based on a fixed-grid finite difference method has been developed for simulation of the galvannealing process where a galvanized sheet is subjected to an annealing treatment to transform the zinc coating to iron-zinc alloy coating. In the present study, the galvannealing reaction h

Determination of Materials Selection Per
Determination of Materials Selection Performance Indices Through the Combination of Numerical Modeling and Optimization Methods
✍ German Castillo; HervΓ© Wargnier; Michel Danis; Yves Brechet πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 601 KB

## Abstract After translation, the first stages traditionally involved in the materials selection are filtration and classification, which require formulation of criteria (constraints or objectives) deduced from information written in the set of material requirements. These criteria, which are repr

Determination of process parameters thro
Determination of process parameters through a mechanistic force model of milling operations
✍ Guven Yucesan; Qufei Xie; Abdel E. Bayoumi πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 739 KB

Mechanistic process parameters for the end milling operation are determined for llL17 free machining steel, 2024 aluminum and 62-35-3 free machining brass by analyzing the measured cutting force data and using a mechanistic force model. It has been found that pressure and friction acting on the cutt