✦ LIBER ✦

Optimization of chromatic dispersion measurement technique using relative power of two beating frequencies

✍ Scribed by H. A. Abdul-Rashid; M. T. Al-Qdah; H. T. Chuah; M. Tayahi; M. K. Abdullah

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 138 KB
Volume: 48
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.21893

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Optimization study of the Chromatic Dispersion measurement technique using relative power of two beating frequencies is presented in this paper. The performance of the CD measurement technique is studied in terms of the measurement range and sensitivity as the wavelength separation is varied. Based on the mathematical model and experimental results the technique sensitivity increases with wavelength separation. However, this increase in sensitivity is traded off with narrower measurement range. The measurement technique is optimized at 5.0 GHz wavelength separation with sensitivity of 0.009 (dB/ps/nm) and measurement range of 2500 (ps/nm). © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 2154–2156, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21893

📜 SIMILAR VOLUMES

Chromatic dispersion measurement using t

Chromatic dispersion measurement using the relative power of two beating frequencies

✍ M. T. Al-Qdah; H. A. Rashid; M. Khazani; K. Dimyati; B. M. Ali 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 88 KB

## Abstract A novel technique for measuring the accumulated chromatic dispersion (CD) in single‐mode fiber (SMF) is presented. The technique measures CD by simultaneously launching pump and probe optical signals at ω~1~ angular optical‐frequency separation, and two phase‐conjugated terms into the S

Optimization of optical modulator chirp

Optimization of optical modulator chirp measurement technique using differential frequency beating

✍ H. A. Abdul-Rashid; M. T. Al-Qdah; H. T. Chuah; M. Tayahi; M. K. Abdullah 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB

## Abstract Optimization of the optical modulator chirp measurement technique using differential frequency beating is presented in this paper. The performance of the chirp measurement technique is studied in terms of the measurement range, sensitivity, and resonant frequency as the accumulated chro

ERRORS IN THE MEASUREMENT OF STRUCTURE-B

ERRORS IN THE MEASUREMENT OF STRUCTURE-BORNE POWER FLOW USING TWO-ACCELEROMETER TECHNIQUES

✍ R.S. Ming; R.J.M. Craik 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 213 KB

This paper presents a theoretical study of three errors in the measurement of structure-borne power flow in one-dimensional structures using two-accelerometer techniques. It is assumed that the physical and material properties of the test structure are known. For the measurement of bending wave powe

A new technique for measuring dispersion

A new technique for measuring dispersion of optical fibers using a frequency-shifted feedback fiber laser. part I: Measurement of group velocity dispersion

✍ Masato Yoshida; Toshiyuki Miyamoto; Koichiro Nakamura; Hiromasa Ito 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 154 KB

## Abstract With the continually improving performance of long‐distance optical communication systems, it becomes important to administer and control wavelength dispersion of the optical fiber. In this paper, a method of measurement of the group velocity dispersion (GVD) of an optical fiber using o