𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Optimization of an industrial semibatch nylon 6 reactor

✍ Scribed by R. Sareen; M. R. Kulkarni; S. K. Gupta


Publisher
John Wiley and Sons
Year
1995
Tongue
English
Weight
661 KB
Volume
57
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Multiobjective optimization of an indust
✍ Ravi Raj Gupta; Santosh K. Gupta πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 251 KB πŸ‘ 2 views

Multiobjective Pareto optimal solutions for three different grades of nylon-6 produced in an industrial semibatch reactor are obtained by using the adapted Nondominated Sorting Genetic Algorithm (adapted NSGA). The two objective functions minimized are the total reaction time and the concentration o

Multiobjective dynamic optimization of a
✍ K. Mitra; K. Deb; Santosh K. Gupta πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 323 KB πŸ‘ 2 views

The nondominated sorting genetic algorithm (NSGA) is adapted and used to obtain multiobjective Pareto optimal solutions for three grades of nylon 6 being produced in an industrial semibatch reactor. The total reaction time and the concentration of an undesirable cyclic dimer in the product are taken

Dynamic optimization of an industrial se
✍ Naveen K. Kohli; Rajeev Sareen; Santosh K. Gupta πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 823 KB

In this study, optimal vapor release rate (or pressure) histories have been generated for an industrial semi-batch nylon 6 reactor using Pontryagin's minimum principle. The batch time has been taken as the objective function, which is to be minimized. The pressure is constrained to lie between a low

Simulation of Nylon 6 Polymerization in
✍ Xiao Wenhua; Nanxun Huang; Zhilian Tang; Roberto Filippini-Fantoni πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 169 KB

## Abstract A commonly used nylon 6 two‐step VK tubular reactor is simulated in this work. To verify the reliability of the model, careful comparison with results obtained on different continuous plants is made. The effect of various conditions and parameters, e.g. feed composition, temperature, pr