𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Optimal design of dispersive tubular reactors at steady-state using optimal control theory

✍ Scribed by F. Logist; P.M.M. Van Erdeghem; I.Y. Smets; J.F. Van Impe


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
498 KB
Volume
19
Category
Article
ISSN
0959-1524

No coin nor oath required. For personal study only.

✦ Synopsis


This paper studies the design of optimal temperature profiles for a class of exothermic, jacketed dispersive tubular reactors under steady-state conditions and subject to maximum temperature constraints. The studied class ranges from perfectly mixed continuous stirred tank reactors to plug flow reactors. The aim is to derive the Pareto optimal set of temperature profiles for conflicting conversion and energy costs, while extracting generic features from the obtained solutions. Hereto, a four step procedure which is based on a weighted sum of both costs and which combines indirect, analytical and direct, numerical optimal control techniques, is employed. The generic features are studied (i) along the Pareto set by varying the weights and (ii) along the reactor class by adapting the dispersion level.


πŸ“œ SIMILAR VOLUMES


Design of adiabatic selective pulses usi
✍ Daniel Rosenfeld; Yuval Zur πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 781 KB

## Abstract Optimal control theory has been applied in the past for the design of RF pulses for selective excitation. This was the outcome of having established the controllability of the MR spin system for the selective excitation problem. β€œMinimum distance” was the main formulation used for the s

On the design of P-I-D controllers using
✍ M. Athans πŸ“‚ Article πŸ“… 1971 πŸ› Elsevier Science 🌐 English βš– 363 KB

## Conclusion The asymptotic stability of the origin for a class of sixth order non-linear system is proved. Thus, the result is in the most general form.