๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Optimal control of a flexible manipulator and controller order reduction

โœ Scribed by Jeff K. Pieper

Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
183 KB
Volume
19
Category
Article
ISSN
0143-2087

No coin nor oath required. For personal study only.

โœฆ Synopsis

Presented is a control system design study for a flexible manipulator. The device consists of a DC electric motor drive connected via two flexible links to an end effector for position control. The paper details in tutotrial fashion optimal control designs using both H and H methods with dynamic weighting. The resulting controller is found to be fairly of high order for implementation and so controller order reduction is considered. It is observed that reduction of the controller order beyond a nominal amount cannot be done. A reason for this is postulated using novel perturbation models where it is found that the controller reduction problem is, in this case, a roadblock to practical implementation of the control.

๐Ÿ“œ SIMILAR VOLUMES

Design of an optimal feedback linearizin
Design of an optimal feedback linearizing-based controller for an experimental flexible-joint robot manipulator
โœ Tarek Lahdhiri; Hoda A. Elmaraghy ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 226 KB ๐Ÿ‘ 2 views

This paper presents the design of an optimal non-linear position tracking controller for a two-link #exible joint robot manipulator. The controller is designed based on the concept of exact feedback linearization and LQG/LTR techniques. It is shown that the non-linear robot model is feedback lineari

Manoeuvring and vibration reduction of a
Manoeuvring and vibration reduction of a flexible spacecraft integrating optimal sliding mode controller and distributed piezoelectric sensors/actuators
โœ Qinglei Hu; Guangfu Ma ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 37 KB

## Abstract After publication, it was determined that this paper contained an error where Equation (36) cannot be solved because it is constrained by the inequality of Equation (30). To overcome this, we here change the mistake into a static output feedback problem. Equation (29) can be rewritten

APPLICATIONS OF A SUB-OPTIMAL DISCONTINU
APPLICATIONS OF A SUB-OPTIMAL DISCONTINUOUS CONTROL ALGORITHM FOR UNCERTAIN SECOND ORDER SYSTEMS
โœ G. Bartolini; A. Ferrara; E. Usai ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 343 KB ๐Ÿ‘ 2 views

In this paper the authors present a couple of algorithms, one for the case of analogue devices and one for the case of digital devices, that realize a nonlinear controller performing a second order sliding mode. These algorithms allow the finite time stabilization of uncertain second order nonlinear