aspect ratio bra s 0.2, the modal characteristics remain somewhat stable. We thus infer that only distortions with bra G 0.2 are likely to affect the modal characteristics considerably.
Optical generation of microwave signal for FMCW radar applications
✍ Scribed by S. Faci; C. Tripon-Canseliet; A. Benlarbi-Delaï; G. Alquié; S. Formont; J. Chazelas
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 253 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
An optically shifted oscillator has been designed in integrated technology and tested in order to use as a signal generator for frequency modulated continuous wave radar applications. Simulation and measurement results demonstrate a 200 MHz microwave frequency tuning range when the applied optical power varies from 0 to 100 mW at a wavelength of 800 nm. Illumination is applied on a photoconductive switch inserted within the circuit to achieve a quasi‐linear oscillation frequency shift with a linear variation of optical power. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 690–693, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24146
📜 SIMILAR VOLUMES
## Abstract We have experimentally demonstrated a new optical microwave signal generation scheme using semiconductor lasers in a master–slave configuration, in which both lasers are directly modulated. The sidebands of the slave laser are locked to those of the master laser by the simple control of
## Abstract We propose and demonstrate a simple approach to optical generation of microwave signal by exploiting a uniform fiber Bragg gating (FBG)‐based double‐ring laser and a saturable absorber.Parallel arranged uniform FBGs have a wavelength spacing corresponding to the microwave signal. A piec
## Abstract Because of the unique properties of nanoparticles in the electromagnetic spectrum, its use as diagnostic agents for improved visualization is an emerging research area in biomedical imaging. However specific aspects of nanoparticles need to be explored to illustrate these applications.