✦ LIBER ✦

One-step compatibilization of polyamide 6/ poly (ethylene-1-octene) blends with maleic anhydride and peroxide

✍ Scribed by Biaobing Wang; Lixia Hao; Wei Wang; Guosheng Hu

Book ID: 106438660
Publisher: Springer
Year: 2009
Tongue: English
Weight: 309 KB
Volume: 17
Category: Article
ISSN: 1022-9760
DOI: 10.1007/s10965-009-9373-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Compatibilization of Poly(ethylene terep

Compatibilization of Poly(ethylene terephthalate)/Polypropylene Blends with Maleic Anhydride Grafted Polyethylene-Octene Elastomer

✍ Hsien-Tang Chiu; Yao-Kuei Hsiao 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 462 KB

Plastic waste minimization: Compatibiliz

Plastic waste minimization: Compatibilization of polypropylene/polyamide 6 blends by polyalkenyl-poly-maleic-anhydride-based agents

✍ Miskolczi, Norbert; Kucharczyk, Pavel; Sedlarik, Vladimir; Szakacs, Hajnalka 📂 Article 📅 2013 🏛 John Wiley and Sons 🌐 English ⚖ 924 KB

Study on morphology of compatibilized po

Study on morphology of compatibilized poly (vinyl chloride)/ultrafine polyamide-6 blends by styrene–maleic anhydride

✍ Chuanxi Xiong; Shengjun Lu; Tao Wang; Yang Hong; Tao Chen; Zhiyong Zhou 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 191 KB 👁 1 views

Polymer blends of polyamide-6 (PA6) and

Polymer blends of polyamide-6 (PA6) and poly(phenylene oxide) (PPO) compatibilized by styrene-maleic anhydride (SMA) copolymer

✍ Chih-Rong Chiang; Feng-Chih Chang 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 916 KB

The commercially available styrene-maleic anhydride copolymer (SMA-8% MA) has been demonstrated to be a highly effective compatibilizer for polymer blends of polyamide-6 (PA6) and poly(2,6-dimethyl-1,4phenylene oxide) (PPO). SMA is miscible with PPO and tends to be dissolved in the PPO phase during

Compatibilization of poly(2,6-dimethyl-1

Compatibilization of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 blends with styrene–maleic anhydride copolymer: Mechanical properties, morphology, crystallization, and melting behavior

✍ Shuai Wang; Bo Li; Yong Zhang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 495 KB 👁 1 views

Compatibilization and toughening of poly

Compatibilization and toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 alloy with poly(ethylene 1-octene): Mechanical properties, morphology, and rheology

✍ Xiaodong Wang; Wei Feng; Hangquan Li; Riguang Jin 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB 👁 2 views

## Abstract Blends of a poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO)/polyamide 6 (PA 6) alloy toughened with a novel polyolefin elastomer poly(ethylene‐1‐octene) (POE) were prepared via melt extrusion. In order to improve the compatibilization between POE and the PPO/PA 6 alloy, POE was grafted wit