✦ LIBER ✦

On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel

✍ Scribed by Seawoong Lee, Bruno C. De Cooman

Book ID: 120925091
Publisher: The Minerals, Metals & Materials Society
Year: 2013
Tongue: English
Weight: 823 KB
Volume: 44
Category: Article
ISSN: 1073-5623
DOI: 10.1007/s11661-013-1860-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of the austenitic rolling temp

Influence of the austenitic rolling temperature on the microstructure of a TRIP steel before intercritical annealing

✍ C. N. dos Santos; A. G. Vieira; A. S. Paula; C. S. C. Viana 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 394 KB

The formation of austenite at low interc

The formation of austenite at low intercritical annealing temperatures in a normalized 0.08C-1.45Mn-0.21Si steel

✍ Yang, D. Z. ;Brown, E. L. ;Matlock, D. K. ;Krauss, G. 📂 Article 📅 1985 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 538 KB

On Optimizing Batch Annealing for the Pr

On Optimizing Batch Annealing for the Production of IF Steels

✍ Shi, Jing; Cui, Deli 📂 Article 📅 2003 🏛 Taylor and Francis Group 🌐 English ⚖ 354 KB

Calculation on the incubation period of

Calculation on the incubation period of proeutectoid ferrite transformation for Si-Mn TRIP steel

✍ Guang-bo Tang; Ning-qi Peng; Zheng-dong Liu 📂 Article 📅 2011 🏛 Chinese Electronic Periodical Services 🌐 English ⚖ 539 KB

Dependence of microstructure on the cool

Dependence of microstructure on the cooling rate for a modified austenite medium Mn steel

✍ Gao-Fei Liang; Zhen-Ming Xu; Jian-Guo Li 📂 Article 📅 2004 🏛 Springer 🌐 English ⚖ 299 KB

ANN model for prediction of the effects

ANN model for prediction of the effects of composition and process parameters on tensile strength and percent elongation of Si–Mn TRIP steels

✍ S.M.K. Hosseini; A. Zarei-Hanzaki; M.J. Yazdan Panah; S. Yue 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 351 KB

The effects of composition and intercritical heat treatment parameters on tensile strength and percentage elongation of Si-Mn TRIP steels were modeled, using a neural network with a feed forward topology and a back propagation algorithm. It was found that a committee of nets models the experimental