✦ LIBER ✦

On the pore size distribution in asymmetric reverse osmosis membranes

✍ Scribed by Branko Kunst; Petar Goran

Publisher: Elsevier Science
Year: 1982
Tongue: English
Weight: 161 KB
Volume: 87
Category: Article
ISSN: 0021-9797
DOI: 10.1016/0021-9797(82)90354-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Pore size and pore size distribution on

Pore size and pore size distribution on the surface of polyethersulfone hollow fiber membranes

✍ Tinghui Liu; Shuguang Xu; Donghua Zhang; S Sourirajan; Takeshi Matsuura 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 701 KB

Mechanism of pore formation in reverse o

Mechanism of pore formation in reverse osmosis membranes during the casting process

✍ P. Neogi 📂 Article 📅 1983 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 980 KB

The Nature of Pores in the Skin Layer of

The Nature of Pores in the Skin Layer of Polymeric Reverse Osmosis/Ultrafiltration Membranes

✍ Wood, Hal ;Sourirajan, S. 📂 Article 📅 2008 🏛 Curtin University of Technology 🌐 English ⚖ 524 KB

Discussions on the formation mechanism o

Discussions on the formation mechanism of surface pores in reverse osmosis, ultrafiltration, and microfiltration membranes prepared by phase inversion process

✍ Zhu Zhenxin; Takeshi Matsuura 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 652 KB

Preparation of microporous chlorinated p

Preparation of microporous chlorinated poly(vinyl chloride) membrane in fabric and the characterization of their pore sizes and pore-size distributions

✍ Jong Seok Kang; Ki Yoen Kim; Young Moo Lee 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 836 KB

Effect of casting conditions on the perf

Effect of casting conditions on the performance of porous cellulose acetate membranes in reverse osmosis

✍ B. Kunst; S. Sourirajan 📂 Article 📅 1970 🏛 John Wiley and Sons 🌐 English ⚖ 553 KB

Several sets of porous cellulose acetate membranes were made using the same casting solution composition and gelation conditions but varying the casting solution temperature and solvent evaporation conditions. The films were tested in reverse osmosis experiments at 250 psig using aqueous feed soluti