𝔖 Bobbio Scriptorium
✦   LIBER   ✦

On the opening and edge-sliding fracture toughness of aluminium-epoxy adhesive joints

✍ Scribed by Y. W. Mai; A. S. Vipond

Publisher
Springer
Year
1978
Tongue
English
Weight
400 KB
Volume
13
Category
Article
ISSN
0022-2461

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The fracture toughness and stress corros
The fracture toughness and stress corrosion cracking characteristics of an anhydride-hardened epoxy adhesive
✍ S. Mostovoy; E. J. Ripling πŸ“‚ Article πŸ“… 1971 πŸ› John Wiley and Sons 🌐 English βš– 780 KB

## Abstract The toughness and stress corrosion cracking characteristics of an epoxy resin (DER 332) hardened with hexahydrophthalic anhydride (HHPA) were investigated. The epoxy was studied in both the bulk and bond form, and its properties were compared with an amine‐hardened (tetraethylene pentam

The effect of friction on pin jointed si
The effect of friction on pin jointed single edge notch fracture toughness test specimens
✍ L. P. Pook πŸ“‚ Article πŸ“… 1968 πŸ› Springer Netherlands 🌐 English βš– 114 KB

A theoretical estimate is made of the effect of pin friction on values of the stress intensity factor forthe ASTM type single edge notch fracture toughness test specimen. It is shown that for a coefficient of friction of 0.2 between pins and specimen the stress intensity factor is reduced by approxi

Influence of adhesive thickness and fill
Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive
✍ Ramazan Kahraman; Mehmet Sunar; Bekir Yilbas πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 674 KB

The objective of this study was to develop information on the influence of adhesive thickness and aluminum filler content on the mechanical performance of aluminum joints bonded by aluminum powder filled epoxy. The adhesive strength of the joints was determined by utilizing the single-lap shear test