𝔖 Bobbio Scriptorium
✦   LIBER   ✦

On the localization of inelastic flow during cyclic deformation

✍ Scribed by Dr. habil. B. Pegel


Publisher
John Wiley and Sons
Year
1984
Tongue
English
Weight
347 KB
Volume
19
Category
Article
ISSN
0232-1300

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effect of Cyclic Deformations on the Dyn
✍ Azza A. M. Ward; Bernhard Stoll; Wolfgang von Soden; Stephan Herminghaus; Ashraf πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 256 KB

## Abstract The effect of the chemical modification of the silica surface by the silane coupling agent (Si69) on both the real and the imaginary parts of the shear compliance (__Jβ€²__, __Jβ€³__) on silica‐filled butyl rubber vulcanizates was investigated in a wide temperature and frequency range, βˆ’70

The Effect of Stage on Flow and Componen
✍ Whiting, Peter J. πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 283 KB πŸ‘ 2 views

Flow fields and water and bed surface topography were measured at two different stages as flow shoals over a submerged mid-channel bar in a straight reach downstream of a bend in Solfatara Creek, Wyoming. The data allow calculation and comparison of the magnitude of the component terms in the downst

Analyses on the Background of Dynamic In
✍ Cai, B. ;Kong, Q. P. πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 180 KB πŸ‘ 2 views

An analysis on the background of dynamic internal friction (DIF) and the modulus defect (DGaG) at low frequency during plastic deformation in single crystal specimens is given. The background Q Γ€1 b is considered to be associated with the string vibration of immobile dislocations under a combined a

A study on the nonuniform deformation of
✍ Yu-Hai Guo; Jian-Yong Chen; Jing-Xin Gao; Hua-Peng Zhang; Xin-Xing Feng πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 488 KB

## Abstract To understand the deformation of biaxially stretched polytetrafluoroethylene (PTFE) membrane during the tenter frame transverse stretching process, a finite element analysis (FEA) model was established to study the stress and displacement distribution during the transverse stretching. T