✦ LIBER ✦

On the characterization by shrinkage forces of as-spun poly(ethylene terephthalate) filaments

✍ Scribed by Ch.D. Bechev

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 496 KB
Volume: 14
Category: Article
ISSN: 0142-9418
DOI: 10.1016/0142-9418(95)93195-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of carriers on drawn poly(eth

The effect of carriers on drawn poly(ethylene terephthalate) filaments

✍ W. Ingamells; A. M. Yabani 📂 Article 📅 1978 🏛 John Wiley and Sons 🌐 English ⚖ 440 KB 👁 2 views

## Abstract The effect of various organic compounds on the birefringence equilibrium shrinkage and swelling of poly(ethylene terephthalate) filaments was studied. Evidence is presented that suggests the carrier action of the compounds is dominated by dispersion forces and that interaction between d

Effect of initial take-up speed on prope

Effect of initial take-up speed on properties and structure of as-spun and drawn/heat-set poly(ethylene terephthalate) filaments

✍ J. F. Hotter; J. A. Cuculo; P. A. Tucker; B. K. Annis 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 426 KB 👁 2 views

The effect of initial take-up speed on the properties and structure of both as-spun and drawn/heat-set poly(ethylene terephthalate) filaments was characterized through measurements of birefringence, percent crystallinity, tensile properties, high temperature shrinkage, loss tangent temperature depen

Mechanical, thermal, and structural char

Mechanical, thermal, and structural characterization of poly(ethylene terephthalate) and poly(butylene terephthalate) blend systems by the addition of postconsumer poly(ethylene terephthalate)

✍ R. N. Baxi; S. U. Pathak; D. R. Peshwe 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 304 KB 👁 3 views

Effect of liquid isothermal bath positio

Effect of liquid isothermal bath position in modified poly(ethylene terephthalate) PET melt spinning process on properties and structure of As-spun and annealed filaments

✍ J. F. Hotter; J. A. Cuculo; P. A. Tucker; B. K. Annis 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 445 KB 👁 2 views

The ability to produce as-spun poly(ethylene terephthalate) (PET) filaments that possess previously unsurpassed levels of as-spun orientation and tensile properties was achieved through the implementation of a device described as a liquid isothermal bath (LIB). Although much has been published regar

Effect of winding speed on the physical

Effect of winding speed on the physical structure of as-spun poly(ethylene terephthalate) fibers, including orientation-induced crystallization

✍ H. M. Heuvel; R. Huisman 📂 Article 📅 1978 🏛 John Wiley and Sons 🌐 English ⚖ 917 KB

## Abstract As‐spun fibers of poly(ethylene terephthalate), PET, made at winding speeds ranging from 2000 to 6000 m/min exhibit quite different physical structures. Yarns wound at relatively low speeds are amorphous, whereas those spun at high speeds contain well‐developed crystals of closely packe

Studies on the formation of poly(ethylen

Studies on the formation of poly(ethylene terephthalate): 9. Thermal decomposition of ethylene dibenzoate as a model compound of poly(ethylene terephthalate)

✍ Kosuke Tomita 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 209 KB