On the application of a damped model to the falling weight impact characterization of glass beads–polystyrene composites

✍ Scribed by M. Sánchez-Soto; A. B. Martínez; O. O. Santana; A. Gordillo

• Publisher: John Wiley and Sons
• Year: 2004
• Tongue: English
• Weight: 369 KB
• Volume: 93
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/app.20582

✦ Synopsis

Abstract

Instrumented falling weight impact tests were carried out to characterize the mechanical behavior of a material pattern formed by polystyrene and different amounts of glass beads. This characterization was performed at high strain rate using two different impact arrangements: the first uses high impact energy at the striker, whereas the second uses a low‐impact energy. Starting from a conservative model, a nonconservative one has been proposed for the low‐energy impact configuration as a better approach to the material behavior. In this latter model, the energy losses were quantified through the restitution coefficient. Two alternative methods for its calculation are described. The results shows good agreement between the flexural modulus and break stresses calculated in either the low‐ or the high‐energy arrangement; however, the low‐energy impact method yields more confidence results. Using the proposed model, the composites' fracture onset was determined, and also in the samples with low content of glass beads, it was possible to assess the micromechanism of failure, given the estimation for the stress to produce crazing. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1271–1284, 2004