In this paper the influence of geometry of edge-cracked plates on crack propagate under mixed mode loading conditions is studied. The edge-cracked plates under tension are examined. The crack extension angle and the critical stress of fracture are determined for various values of the crack inclinati
On contact of the crack edges
β Scribed by V.B. Pen'kov; L.A. Tolokonnikov
- Publisher
- Elsevier Science
- Year
- 1980
- Tongue
- English
- Weight
- 402 KB
- Volume
- 44
- Category
- Article
- ISSN
- 0021-8928
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Following the idea of Bowie and Freese we consider a crack in a field of pure bending. The crack is closed over part of its extent, and the two crack faces in contact are allowed to slip under frictional constraints. The solution is constructed under the assumption that the applied loading is monoto
## Abstract Coating die edges are not mathematical corners, they are rounded. Contact lines do not actually pin. The effects of the radius of curvature of the downstream edge of slot dies on contact line location, effective contact angle, and lowβflow limitβairβfingers penetrating from downstream a
## Abatraet-Plane strain problems for a crack parallel to an interface between dissimilar materials, with a crack-face contact zone near one of the crack tips, are studied. These subinterface crack problems are formulated as nonlinear systems of Cauchy-type singular integral equations which are so
New solutions for stresses due to a pair of horizontal or vertical forces acting symmetrically on the surface of a strip are obtained and shown to be easier to evaluate than those that are available in the literature. The displacements and strains on the surface due to a normal stress distribution o