Nutshells as granular activated carbons: physical, chemical and adsorptive properties
✍ Scribed by L H Wartelle; W E Marshall
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2001
- Tongue
- English
- Weight
- 114 KB
- Volume
- 76
- Category
- Article
- ISSN
- 0268-2575
- DOI
- 10.1002/jctb.408
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Nutshells from seven different sources (pistachio, hazelnut, almond, black walnut, English walnut, macadamia nut, pecan) were converted to granular activated carbons (GACs) by carbon dioxide activation. A portion of the GACs were oxidized with compressed air and the physical (yield, surface area, attrition), chemical (pH, surface charge) and adsorptive (organics uptake, metal ion uptake) properties of both oxidized and non‐oxidized carbons were determined. Differences in uptake of organics, especially of polar compounds, were found between GACs made from almond shells, the group consisting of black walnut shells, English walnut shells and pecan shells, and macadamia nutshells. Oxidation had its greatest effects on pH, surface charge and uptake of metal ions. The changes due to oxidation were found to be independent of carbon source material. GACs with specific properties can be produced with judicious selection of carbon precursor and oxidative treatment.
© 2001 Society of Chemical Industry
📜 SIMILAR VOLUMES
Granular activated carbons for methane adsorption have been prepared by impregnation of oil palm shell with various solutions of ZnCl 2 followed by heat treatment at 500 • C under a flow of nitrogen. For this precursor, large micropore volume of micropores (with a very small volume of mesopores and
commercially available active carbon, impregnated with sulphur, has been characterized and compared to the original carbon by using adsorption and immersion techniques. The specific reaction of liquid CS2 with sulphur, following the preadsorption of various amounts of n-nonane, shows that the access
Experimental studies were carried out to determine the effects of influent pH, ionic strength, metal concentration, and empty-bed contact time (EBCT) on copper sorption in the activated carbon fixed-bed columns. As the influent pH was increased, the column performance significantly improved. An over