Numerical Simulations of the Effect of Microstructure on AC Conductivity of MWCNT/Polymer Nanocomposites
โ Scribed by Xinxin Sun; Mo Song
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 420 KB
- Volume
- 19
- Category
- Article
- ISSN
- 1022-1344
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
A continuum model is developed to investigate the microstructureโdependent AC properties of MWCNT/polymer nanocomposites. The AC conductivity of the composite is increased by a higher curl ratio of MWCNTs. At a critical frequency ฯ~0~, the AC conductivity switches to a frequencyโdependent region. For high MWCNT content, the curl curliness of MWCNTs has only a weak influence on the AC conductivity. For medium MWCNT content, the AC conductivity became frequencyโdependent for low frequencies with decreasing curl ratio of MWCNTs, which cannot be explained by correlation length theory. An interpretation based on the linear circuit theory is given. With increasing size of MWCNT clusters, the critical frequency ฯ~0~ increases. It is also affected significantly by the crystallinity the polymer.
magnified image
๐ SIMILAR VOLUMES
Clothing materials may be considered composite materials composed of fiber, air, and moisture. For this paper, effective thermal conductivities of wet clothing materials were analyzed numerically using a proposed heat transfer model. The following simplifications were introduced. The clothing materi
be avoided if aliasing errors are small compared to truncation errors. Aliased and dealiased numerical simulations of a turbulent channel flow are performed using spectral and finite difference methods. ## The problem of aliasing errors in spectral simulations Analytical and numerical studies sh
## Abstract The objective of this work is to understand the effect of shear force on the properties of epoxyโclay nanocomposites. The shear force was controlled by changing the revolutions per minute on a mechanical mixer. Differences in the aspect ratio of clay layers and differences of clay parti