Numerical simulation study on gas–solid two-phase flow in pre-calciner
✍ Scribed by Zhijuan Hu; Jidong Lu; Lai Huang; Shijie Wang
- Publisher
- Elsevier Science
- Year
- 2006
- Tongue
- English
- Weight
- 385 KB
- Volume
- 11
- Category
- Article
- ISSN
- 1007-5704
No coin nor oath required. For personal study only.
✦ Synopsis
A three-dimensional numerical simulation of DD (dual combustion and denitratior process) pre-calciner for cement production was conducted in this paper. In Euler coordinate system, the fluid phase is expressed with RNG k-e two-equation model and the solid phase is expressed with particle stochastic trajectory model in Lagrange coordinate system. Four mixture fractions are deduced in this article to simulate the gas compositions. The results of numerical simulation predicted the burn-out ratio of coal and the decomposition ratio of limestone particles along with particle trajectories. It also supplied theoretical foundation for industrial analysis of the coupling relation between coal combustion and calcium carbonate decomposition.
📜 SIMILAR VOLUMES
Numerical simulation of ceramic filter unit was carried out in order to predict the gas flow in the filter vessel during the pulse cleaning process using FLUENT code. The particle movement and particles distribution were analyzed using both the Lagrangian and Eulerian approaches. Ceramic filter unit
## Abstract The gas/solid flow characteristics in a circulating fluidized bed with two different inlet configurations were investigated by numerical simulation based on an Eulerian approach. In order to describe the interaction between the gas phase and the solid phase and the influence of the soli