✦ LIBER ✦

Numerical simulation of temperature distribution in melt spinning of PET monofilament

✍ Scribed by Tae Hwan Oh

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 261 KB
Volume: 102
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.24197

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Numerical simulations of draw resonance

Numerical simulations of draw resonance in melt spinning of polymer fluids

✍ Jinan Cao 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 572 KB

Numerical simulation of rheological effe

Numerical simulation of rheological effects in fiber spinning

✍ Evan Mitsoulis; Michel Beaulne 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 736 KB

The fiber-spinning process is an important industrial operation to manufacture synthetic fibers. The process occurs under free-surface conditions, and the final properties of the fiber are characterized by the extensional properties of the polymer. Specifically, the non-isothermal response of the po

Numerical simulation of cavity roughness

Numerical simulation of cavity roughness effects on melt filling in microinjection molding

✍ N. S. Ong; H. L. Zhang; Y. C. Lam 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 398 KB

## Abstract In microinjection molding, when dimensions of molded parts, and thus the cavity are small, cavity roughness may become significant for the filling of polymer melt. In this paper, cavity roughness effects on filling polymer melt flow into a thin circular cavity were investigated numerica

Numerical Simulation of Temperature and

Numerical Simulation of Temperature and Flow Field in the Melt for the Vapour-pressure- controlled Czochralski Growth of GaAs

✍ W. Miller; U. Rehse 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 252 KB 👁 2 views

Simulation of temperature and flow field

Simulation of temperature and flow fields in an inductively heated melt growth system

✍ M. H. Tavakoli; E. Mohammadi-Manesh; S. Omid 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 302 KB 👁 2 views

## Abstract The goal of the research presented here is to apply a global analysis of an inductively heated Czochralski furnace for a real sapphire crystal growth system and predict the characteristics of the temperature and flow fields in the system. To do it, for the beginning stage of a sapphire

Temperature Distribution of a Floating Z

Temperature Distribution of a Floating Zone in Electron Beam Zone Melting of Molybdenum

✍ Dipl.-Phys. R. Göbel; Dr.-Ing. M. Jurisch; Dr. rer. nat. W. Löser; Dr. E. Martuz 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 459 KB

The temperature distribution in the molten zone for the electron beam zone melting of molybdenum was calculated on the basis of a heat flow model of the rod. Input parameters were the measured axial electron beam density distribution a t the rod surface and the supplied power. The calculated zone sh