𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Numerical modelling of film cooling with and without mist injection

✍ Scribed by Homayoon Kanani; Mehrzad Shams; Reza Ebrahimi

Book ID
105925177
Publisher
Springer-Verlag
Year
2008
Tongue
English
Weight
872 KB
Volume
45
Category
Article
ISSN
1432-1181

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Numerical modelling of filtration with a
Numerical modelling of filtration with and without sedimentation runs
✍ R. Font; M. PΓ©rez πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 694 KB

From experimental batch runs of filtration with sedimentation above the cake formed, a procedure is proposed and applied to experimental data for obtaining the relationships between the settling solids velocity in the hindered settling zone, the local specific resistance and the effective pressure a

Film cooling from two rows of holes with
Film cooling from two rows of holes with opposite orientation angles: injectant behavior and adiabatic film cooling effectiveness
✍ Joon Ahn; In Sung Jung; Joon Sik Lee πŸ“‚ Article πŸ“… 2003 πŸ› Elsevier Science 🌐 English βš– 450 KB

The present paper is aiming at describing the injectant behaviors from two rows of film cooling holes with opposite orientation angles. Boundary layer temperature distributions were measured in the streamwise normal plane to illustrate the interaction between the injectant from the holes in the upst