✦ LIBER ✦

Numerical modeling of the forming of fiber bundles from polymer melts

✍ Scribed by V. I. Eliseev; Yu. P. Sovit; L. A. Fleer

Publisher: SP MAIK Nauka/Interperiodica
Year: 1999
Tongue: English
Weight: 619 KB
Volume: 40
Category: Article
ISSN: 0021-8944
DOI: 10.1007/bf02467986

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Spinneretless forming of fibers from pol

Spinneretless forming of fibers from polymer melts

✍ K. E. Perepelkin; V. V. Podosenov; A. A. Konkin 📂 Article 📅 1971 🏛 Springer US 🌐 English ⚖ 209 KB

Modeling of capillary flow in shaped pol

Modeling of capillary flow in shaped polymer fiber bundles

✍ Yan Zhang; Huaping Wang; Chuanxiong Zhang; Yuehua Chen 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 308 KB

Present Challenges in the Numerical Mode

Present Challenges in the Numerical Modeling of Polymer-forming Processes

✍ Michel Vincent; Bruno Vergnes; Yves Demay; Thierrey Coupez; Noëlle Billon; Jean- 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB

Basalt melts for the forming of staple f

Basalt melts for the forming of staple fiber

✍ V. A. Dubrovskii; V. A. Rychko; T. M. Bachilo; A. G. Lysyuk 📂 Article 📅 1968 🏛 Springer US 🌐 English ⚖ 207 KB

Forming of continuous fiber from a glass

Forming of continuous fiber from a glass melt

✍ M. G. Chernyak 📂 Article 📅 1978 🏛 Springer US 🌐 English ⚖ 372 KB

Modeling the pullout behavior of fiber r

Modeling the pullout behavior of fiber reinforced polymer bars from concrete

✍ Xu Chang; Gaowei Yue; Haixiao Lin; Chunan Tang 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 659 KB

This paper presents a numerical investigation of pullout behavior of fiber reinforced polymer (FRP) bar from concrete matrix. As an attempt to capture the debonding process, a progressive damage model is used. Interfacial stress distribution for different load level is analyzed. The effects of embed