๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Numerical modeling and experimental validation of microstructure in gray cast iron

โœ Scribed by Masoud Jabbari, Parviz Davami, Naser Varahram

Book ID
118829851
Publisher
Springer-Verlag
Year
2012
Tongue
English
Weight
393 KB
Volume
19
Category
Article
ISSN
1674-4799

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of cooling rate on microstructure
Effect of cooling rate on microstructure and mechanical properties of gray cast iron
โœ M.M. Jabbari Behnam; P. Davami; N. Varahram ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 965 KB

This paper presents the results obtained and the deductions made from a series of microstructural studies and mechanical tests involving gray cast iron which was sand cast using a variety of modules. The effect of cooling rate on the primary dendrite arm spacing (DAS), secondary dendrite arm spacing

Influence of alloying elements on as-cas
Influence of alloying elements on as-cast microstructure and strength of gray iron
โœ W. Xu; M. Ferry; Y. Wang ๐Ÿ“‚ Article ๐Ÿ“… 2005 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 566 KB

Casting experiments were carried out to produce gray cast irons with compositions in the range (wt.%): Fe-3.2C-wCu-xMo-yMn-zSi, where w = 0.78-1.79, x = 0.11-1.17, y = 0.68-2.34 and z = 1.41-2.32. These key elements were varied systematically during sand casting into 30-mm diameter bars to assess th