Numerical characterisation of the fibre–matrix interface crack growth in composites under transverse compression

✍ Scribed by E. Correa; V. Mantič; F. París

• Publisher: Elsevier Science
• Year: 2008
• Tongue: English
• Weight: 438 KB
• Volume: 75
• Category: Article
• ISSN: 0013-7944
• DOI: 10.1016/j.engfracmech.2008.03.005

✦ Synopsis

Inter-fibre failure under compression transverse to the fibres is studied at micromechanical level. Interfacial fracture mechanics concepts, associated to both the open model and the contact model, are applied. A numerical study is performed using the boundary element method aimed at explaining the origin and evolution of the damage at micromechanical level, considered as fibre-matrix interface cracks. Assuming that the damage starts as small debonds originated by shear stresses at the position where their maximum values are reached, it has been found that the crack shows different morphologies at both tips: an open one and a closed one with a large contact zone. Then the interface crack grows unstably in mixed mode only on the open tip side until this growth changes to stable, once the crack closes at this tip, with the generation of a contact zone.