✦ LIBER ✦

Novel Equipment for the Study of the Compaction of Fine Powders

✍ Scribed by Wei Chen; Alexander Pechenik; Stanley J. Dapkunas; Gasper J. Piermarini; Subhas G. Malghan

Book ID: 110826888
Publisher: John Wiley and Sons
Year: 1994
Tongue: English
Weight: 767 KB
Volume: 77
Category: Article
ISSN: 0002-7820
DOI: 10.1111/j.1151-2916.1994.tb07259.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design of equipment for the hydrostatic

Design of equipment for the hydrostatic compaction of powder products

✍ N. N. Talalueva; N. P. Chumakov; V. S. Tyutenko 📂 Article 📅 1997 🏛 Springer 🌐 English ⚖ 397 KB

The fine structure of reduced copper pow

The fine structure of reduced copper powder in compacts

✍ G. I. Aksenov; P. P. Litvinenko 📂 Article 📅 1965 🏛 Springer 🌐 English ⚖ 338 KB

Dilatometer for studying the densificati

Dilatometer for studying the densification of powder compacts

✍ I.G. Greenfield; R.L. Smith; J.L. Rutherford 📂 Article 📅 1956 🏛 Elsevier Science 🌐 English ⚖ 233 KB

The generally accepted meaning of the term "sintering," as applied in the metallurgical sense, is the formation of bonds between metal particles, accompanied by a densification of the metal-void system under consideration. This phase of metallurgy is of considerable practical and fundamental intere

Threshold pressure for infiltration of c

Threshold pressure for infiltration of ceramic compacts containing fine powders

✍ J. Wannasin; M.C. Flemings 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 348 KB

The compactibility of powder systems - a

The compactibility of powder systems - a novel approach

✍ H. Leuenberger; W. Jetzer 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 642 KB

Study of explosive and shock parameters

Study of explosive and shock parameters for Compaction of Powders

✍ H. S. Yadav; B. T. Patil; G. Haldar 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 666 KB

## Abstract Compaction of aluminium, iron and tungsten powders of particle size 300 BSS has been studied by axisymmetrical geometry. Optimum explosive to powder mass ratio (E/M) to attain maximum density of compact has been determined for different tube diameters in each case. It has been observed