## Abstract On the basis of the double resonant property of the complementary split‐ring resonators (CSRRs), a novel dual‐band microstrip filter is designed, making use of CSRRs as resonant unit and T‐shaped stub as feeding structure. More than one transmission zeros are formed due to the cross cou
Novel dual-band filter using slotline and microstrip resonators
✍ Scribed by Xiu Yin Zhang; Jian-Xin Chen; Quan Xue
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 139 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel dual‐band filter using slotline and microstrip resonators is proposed. By introducing slotline resonators on the ground of conventional microstrip resonator, the filter provides two transmission paths for RF signals. Each path generates its own passband. Both microstrip resonator and slotline resonators share the input and output ports without any external impedance‐matching network. Deep rejection between the two passbands is obtained due to a transmission zero located between them. The filter has the advantages of low insertion loss, compact size, and good selectivity. The simulated and measured results are presented and show good agreements. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 1080–1081, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI.10.1002/mop.22348
📜 SIMILAR VOLUMES
## Abstract A novel dual‐mode dual‐band bandpass filter using nested meander‐loop resonators is proposed in this article. The new filter structure is small and convenient to change the higher passband frequency. Several finite attenuation poles in stopbands are realized to improve the selectivity o
## Abstract In this letter, a dual‐band bandpass filter is proposed by consisting of spiral‐shaped microstrip resonators. Meanwhile, a skew‐symmetric tapped feed structure is applied to introduce two transmission zeros on both sides of individual passbands, and thereby improve the filter selectivit
## Abstract A dual‐band bandpass filter using microstrip slow‐wave resonators is developed for wireless local area network applications. The fundamental and higher order resonant harmonics of a microstrip open‐loop resonator are analyzed against the length of the loading open stub. Then a dual‐band
## Abstract A new dual‐band bandpass filter (BPF) for 2.4/5.2 GHz WLAN systems using two‐stepped impedance resonators is presented. With new properly coupled structure, this filter appears very compact and easy to be fabricated. Measured results show that this BPF has low insertion loss of 0.3 dB a
## Abstract In this article, a novel type of dual‐band bandpass filter (DBBPF) is proposed by using microstrip composite resonators, and its design method is developed based on the lumped‐element equivalent circuit of the filter. Both the midband frequencies and the passband widths of the dual band