𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Novel 3D biomaterials for tissue engineering based on collagen and macroporous ceramics

✍ Scribed by S. Röker; S. Diederichs; Y. Stark; S. Böhm; I. Ochoa; J.A. Sanz; J. M. García-Aznar; M. Doblaré; M. van Griensven; T. Scheper; C. Kasper


Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
230 KB
Volume
40
Category
Article
ISSN
0933-5137

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

In this study, different collagen and ceramic based materials were characterized concerning their mechanical and biocompatible properties. Therefore, they were tested in static and dynamic cultivation using human mesenchymal stem cells derived from adipose tissue.

Zirconia based macroporous ceramic materials with different BET surface areas (Sponceram® 30/90, Sponceram® 30/145) and surface coatings (Hydroxyapatit, Titandioxide: Sponceram®/HA, Sponceram®/Ti) were mechanically evaluated regarding their maximal tension, maximal deformation and their permeability. The maximal tension and maximal deformation of the different ceramic materials were comparable though the permeability of the uncoated ceramic with the largest BET surface area (Sponceram® 30/90) was significantly increased compared to the other ceramics. A porous collagen matrix (Matristypt®) and a porous collagen‐elastin‐matrix (Matriderm®) were similarly evaluated concerning their maximal tension and maximal deformation and compared with decellularized skin. The maximal deformations of the porous collagen materials were comparable but significantly increased compared to decellularized skin. The maximal tension of the porous matrices was five times lower than the maximal tension of decellularized skin.

For the evaluation for cell culture applications, Sponceram®, Sponceram®/HA and two collagen meshes (Matristypt®, Matriderm®) were seeded with human mesenchymal stem cells. Sponceram® was compared to β‐Tricalciumphosphate. The scaffolds were cultivated under static conditions over a time period of 14 days or 21 days respectively. The cell proliferation was examined in regular intervals using MTT assay. The cells growing on the collagen‐elastin matrix showed increased proliferation in comparison to the cells grown on the pure collagen matrix.

The ceramic materials tested statically in cell culture (Sponceram®, Sponceram®/HA) did not show different influence on the proliferation of seeded cells but it was increased compared to the proliferation of the cells seeded on β‐Tricalciumphosophate.

In a rotating bed bioreactor system (Z®RP system, Zellwerk GmbH) the human mesenchymal stem cells were cultured under dynamic conditions on Sponceram® over a time period of 47 days using osteogenic differentiation medium. Continuous increasing glucose consumption and lactate production gives evidence of good cell proliferation. After cultivation, the Sponceram® discs were stained with von kossa and alizarin red which showed matrix calcification.

In summary, the tested collagen‐ and ceramic materials are applicable for the cell culture applications whereas the ceramic materials are presenting a promising approach for bone tissue engineering implementations.


📜 SIMILAR VOLUMES


Novel 3D collagen scaffolds fabricated b
✍ C. Z. Liu; Z. D. Xia; Z. W. Han; P. A. Hulley; J. T. Triffitt; J. T. Czernuszka 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 678 KB

## Abstract This article reports the mechanical properties and __in vitro__ evaluation of a collagen scaffold fabricated using an indirect 3D printing technique. Collagen scaffolds, featuring predefined internal channels and capillary networks, were manufactured using phase change printing. It was

Development and Characterization of Nove
✍ Yingjun Wang; Chunrong Yang; Xiaofeng Chen; Naru Zhao 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB

## Abstract **Summary:** Biomimetic scaffolds are appealing products for the repair of bone defects using tissue engineering strategies. The present study prepared novel biomimetic composite scaffolds with similar composite to natural bone using bioactive glass, collagen, hyaluronic acid, and phosp

Scaffolds based on hyaluronan crosslinke
✍ G. Pitarresi; F. S. Palumbo; G. Cavallaro; S. Faré; G. Giammona 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 302 KB

## Abstract New porous scaffolds, with a suitable hydrolytic and enzymatic degradation, useful for tissue engineering applications have been obtained by a carbodiimide mediated reaction between hyaluronan (HA) and a synthetic polymer with a polyaminoacid structure such as α,β‐polyaspartylhydrazide

An Electrospun Degradable Scaffold Based
✍ Hajar Seyednejad; Wei Ji; Wouter Schuurman; Wouter J. A. Dhert; Jos Malda; Fang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 682 KB

## Abstract Scaffolds based on a novel functionalized polyester, pHMGCL, are electrospun and characterized morphologically and physically. In vitro degradation studies of pHMGCL films show considerable mass loss and molecular weight reduction within 70 weeks. Scaffolds composed of fibers with unifo

Porous hybrid structures based on P(DLLA
✍ Laura Buttafoco; Niels P. Boks; Paula Engbers-Buijtenhuijs; Dirk W. Grijpma; And 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 350 KB

## Abstract Poly (D,L‐lactide)‐__7co__‐(1,3‐trimethylene carbonate) [P(DLLA‐__co__‐TMC)] (83 mol % DLLA) was used to produce matrices suitable for tissue engineering of small‐diameter blood vessels. The copolymer was processed into tubular structures with a porosity of ∼98% by melt spinning and fib

On the Effects of UV-C and pH on the Mec
✍ Matteo Achilli; Jean Lagueux; Diego Mantovani 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 719 KB

## Abstract Collagen‐based vascular substitutes represent in VTE a valid alternative for the replacement of diseased small‐calibre blood vessels. In this study, collagen gel‐based scaffolds were crosslinked combining modulation of pH and UV‐C radiation. The effects on the mechanical properties, on