## Abstract This article presents a dualβfrequency triangular chip antenna suitable for WLAN operation in the 2.4βGHz band (2400β2484 MHz) and 5.2/5.8βGHz bands (5150β5350 MHz/5725β5875 MHz). The proposed triangular chip antenna in this study comprises a rightβangle, isosceles triangular FR4 base o
Notched triangular microstrip antenna for dual-frequency operation
β Scribed by Yi-Hui Jiang; Shun-Shi Zhong
- Book ID
- 107482079
- Publisher
- Chinese Electronic Periodical Services
- Year
- 2003
- Tongue
- English
- Weight
- 300 KB
- Volume
- 7
- Category
- Article
- ISSN
- 1007-6417
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A new design of a slot-loaded rectangular microstrip antenna for single-feed dual-frequency operation is proposed and experimentally studied. The slots loaded in the patch are a pair of bent slots centered in the patch and oriented along the resonant direction, with the spacing between the two slots
## Abstract Dualβfrequency operation is achieved from a compact microstrip antenna by loading a pair of narrow slots close to its radiating edges. The two frequencies have parallel polarization planes and similar radiation characteristics. The ratio between the two operating frequencies can be tune
## Figure 10 Transmittance of x-component from anisotropic plate with and without grid as a function of frequency frequency. However, the parasitic component with the grid becomes much bigger when the frequency shifts far away from the center frequency. ## V. CONCLUSIONS The anisotropic FDTD fo