𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Nonlinear spectral analysis of flow through multifractal porous media

✍ Scribed by Daniele Veneziano; Albert K. Essiam


Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
333 KB
Volume
19
Category
Article
ISSN
0960-0779

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Nonlinear instability of finitely conduc
✍ Abd Elmonem Khalil Elcoot; Galal M. Moatimid πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science 🌐 English βš– 375 KB

A weakly nonlinear stability of two-layers ows between two concentric circular cylinders in porous media, is investigated. The two uids are subjected to a uniform-axial electric ΓΏeld. The boundary value-problem of the considered system is analytically treated using a perturbation procedure based on

Flow-through drying of porous media
✍ Jagannathan Mahadevan; Mukul M. Sharma; Yannis C. Yortsos πŸ“‚ Article πŸ“… 2006 πŸ› American Institute of Chemical Engineers 🌐 English βš– 527 KB

## Abstract The flow of a gas (saturated or dry) through a porous medium, which is partially occupied by a liquid phase, causes evaporation. The latter occurs, even if the inlet gas is fully saturated, as a result of volume expansion. This process, referred to as flow‐through drying, is important i

Single-phase flow through porous media
✍ John C. Slattery πŸ“‚ Article πŸ“… 1969 πŸ› American Institute of Chemical Engineers 🌐 English βš– 653 KB
Two-phase flow through porous media
✍ John C. Slattery πŸ“‚ Article πŸ“… 1970 πŸ› American Institute of Chemical Engineers 🌐 English βš– 766 KB
Flow of molten polymers through porous m
✍ Dale R. Gregory; Richard G. Griskey πŸ“‚ Article πŸ“… 1967 πŸ› American Institute of Chemical Engineers 🌐 English βš– 353 KB πŸ‘ 2 views

The flow of molten polymer through porous media has been investigoted o t constant tempemtures and flow rates. Temperatures of 375", 400", and 425"F., flow rates from 12 to 60 g./min. and particle sizes from 0.054 in. to 6 mm. in diameter were studied. A modified Darcy's law was developed using the