𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Non-fluorinated membrane improves methanol fuel cell performance

Publisher
Elsevier Science
Year
2003
Weight
30 KB
Volume
2003
Category
Article
ISSN
1351-4180

No coin nor oath required. For personal study only.

✦ Synopsis

Lurgi is collaborating with Borealis to further develop its methanol to propylene (MTP) technology. Lurgi has been operating a MTP pilot plant at Tjeldbergodden in collaboration with Statoil since 2002. SΓΌd-Chemie developed and supplies the catalyst for the process. By-products of the process are gasoline, LPG, and fuel gas. The technology is commercially available from Lurgi. Lurgi also supplies MegaMethanol technology to provide feedstock methanol for MTP units.

πŸ“œ SIMILAR VOLUMES

Methanol conditioning for improved formi
Methanol conditioning for improved formic acid fuel cell performance
πŸ“‚ Article πŸ“… 2003 πŸ› Elsevier Science 🌐 English βš– 22 KB

## Thin-film electrocatalyst for unitized regenerative PEMFCs Thin-film electrocatalyst layers with varying PTFE and Nafion contents for unitized regenerative PEM fuel cells (URFCs) made using the paste method were examined as URFC electrodes. Adding Ir catalyst to the oxygen electrode layer signif

Study of performance improvement in a di
Study of performance improvement in a direct methanol fuel cell
✍ Masayuki Kunimatsu; Toshio Shudo; Yasuo Nakajima πŸ“‚ Article πŸ“… 2002 πŸ› Elsevier Science 🌐 English βš– 522 KB

The direct methanol type system consists of simple and compact equipment, and is suited for automobile use. However this system possesses low power density and its internal resistance needs to be reduced. This research investigated characteristics of power output and thermal efficiency in a proton-e

High Performance Fuel Cell Operation wit
High Performance Fuel Cell Operation with a Non-fluorinated Polyphosphazene Electrode Binder
✍ J. Muldoon; J. Lin; R. Wycisk; N. Takeuchi; H. Hamaguchi; T. Saito; K. Hase; F.Β  πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 112 KB

## Abstract Non‐fluorinated sulphonated polyphosphazene (SPOP) was synthesised and characterised for utilisation as an electrode binder. Polarisation curves were obtained at 80 °C and 95% RH in a H~2~/air fuel cell. SPOP has the proper properties for a cathode binder in a fuel cell, as its polarisa

Membrane for hydrogen and methanol fuel
Membrane for hydrogen and methanol fuel cells
πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 148 KB

The fuel cell's power output is controlled through the charge status of the energy storage unit.