## Abstract In order to derive a possible path for developing a large eddy simulation (LES) applicable to high Reynolds‐number turbulent flows with heat transfer, a hybrid approach connecting LES with the Reynolds‐averaged Navier–Stokes (RANS) modeling in the near‐wall region is studied. In this st
Noise prediction for a turbulent jet using different hybrid methods
✍ Scribed by E. Gröschel; W. Schröder; P. Renze; M. Meinke; P. Comte
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 894 KB
- Volume
- 37
- Category
- Article
- ISSN
- 0045-7930
No coin nor oath required. For personal study only.
✦ Synopsis
The acoustic field of a cold single stream jet at Mach number 0.9 and Reynolds number 3600 is determined via computational aeroacoustics (CAA) methods. The jet computation of the acoustical field is performed by two hybrid approaches using a large-eddy simulation (LES) for the flow field and various systems of equations for the acoustical field to construct a robust, efficient, and reliable LES/ CAA solver. The acoustic equations are the Ffowcs Williams-Hawkings equation (FWH) in the frequency domain and the acoustic perturbation equations (APE). The pronounced impact of the data windowing and the radial and streamwise extension of the integration surface on the directivity of the FWH solution is discussed at length. The comparison with available experimental and numerical results at similar flow conditions based on the noise characteristics in the near field shows the solution of the APE system to match the results of the direct LES more accurately than the FWH approach. The APE solution is less susceptible to the size of the source term region than the FWH approach to the location of the source surface. In conjunction with the APE formulation the LES domain can be chosen smaller than for the FWH ansatz resulting in less computational cost for the jet flow. The dominant source term in the APE system for cold jet noise is shown to be the Lamb vector.
📜 SIMILAR VOLUMES
## Abstract By monitoring and analysing three‐dimensional absolute displacement during tunnel excavation, it is possible to predict discontinuity zones ahead of tunnel face. This paper presents results of the three‐dimensional displacement obtained from three‐dimensional simulations using hybrid me
The numerical optimization of a three‐channel radiofrequency (RF) coil with a physical aperture for the open, vertical‐field, MR‐guided, focused ultrasound surgery (MRgFUS) system using the hybrid method of moment (MoM)/finite difference time domain (FDTD) method is reported. The numerical simulatio