Short jute fiber-reinforced polypropylene (PP) composites were prepared using a high-speed thermokinetic mixer. A compatibilizer was used to improve the molecular interaction between jute and PP. Both the percent weight fraction of the jute fiber and compatibilizer were varied to study the dynamic m
NMR and dynamic mechanical studies of drawn polypropylene fibers
✍ Scribed by O. Fričová; D. Olčák; L. Ševčovič; O. Ďurčová
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 116 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0323-7648
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The present study deals with the effects of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites using dynamic mechanical analysis. Composites of polypropylene and various natural fibers including kenaf fibers, wood flour, rice hulls, and newspri
The structure of annealed polypropylene (PP) fibers is studied interferometrically using two-beam Pluta polarizing interference microscope connected to a device to study the draw ratio with birefringence changes dynamically. Relations of drawing changes with some optical and physical parameters are
The physical behavior of isotropic and oriented samples of an isotactic polypropylene (iPP)/ethylene-propylene-copolymer (EPM) reactor blend was studied by performance of dynamic mechanical measurements over a wide temperature range (DMTA). The influence of thermal history and drawing procedure was
The thermal behavior and dynamic mechanical properties of isotactic polypropylene (PP) and reactor blend PP/ethylene-propylene copolymer (EPM), reinforced with different amounts of short glass fibers (GF) and/or polyester fibers (PETF), were investigated by differential scanning calorimetry (DSC) an