✦ LIBER ✦

Nitriding in the high temperature oxidation of Fe-31Mn-9AI-6Cr alloy

✍ Scribed by C. J. Wang; J. G. Duh

Publisher: Springer
Year: 1988
Tongue: English
Weight: 700 KB
Volume: 23
Category: Article
ISSN: 0022-2461
DOI: 10.1007/bf01153965

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

High-temperature oxidation of Fe-16.7% M

High-temperature oxidation of Fe-16.7% Mn-2.1% Ni-6.6% Si alloy in SO2

✍ Y. H. Chung; M. J. McNallan 📂 Article 📅 1989 🏛 Springer-Verlag 🌐 English ⚖ 680 KB

The influence of alloying elements on th

The influence of alloying elements on the chlorine-induced high temperature corrosion of Fe-Cr alloys in oxidizing atmospheres

✍ A. Zahs; M. Spiegel; H. Grabke 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 German ⚖ 448 KB 👁 3 views

The reactive-element effect in the high-

The reactive-element effect in the high-temperature oxidation of Fe-23Cr-5Al commercial alloys

✍ T. Biegun; M. Danielewski; Z. Skrzypek 📂 Article 📅 1992 🏛 Springer-Verlag 🌐 English ⚖ 519 KB

Effect of oxidation and sulfide corrosio

Effect of oxidation and sulfide corrosion in the conditions of a high-temperature gas flow on the strength characteristics of ÉI-958 alloy

✍ A. L. Rozhko; V. P. Lesnikov; B. F. Rybalko 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 530 KB

Influence of the mode of introduction of

Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part III: The use of two stage oxidation experiments and in situ X-ray diffraction to understand the oxidation mechanisms

✍ S. Chevalier; C. Issartel; R. Cueff; H. Buscaif; G. Strehl; G. Borchardt 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 476 KB

The aim of this work was to investigate several different yttrium introduction routes to improve the high temperature oxidation resistance of a Fe-20Cr-5Al model alloy. Y 2 O 3 sol-gel coatings, Y 2 O 3 metal-organic chemical vapor deposition (MOCVD) coatings, yttrium ion implantation and yttrium as