Weak acid ion-exchange membranes were obtained on the basis of PVC/poly(MMA-co-DVB) interpolymer-type systems. Carboxylic groups were introduced by acid hydrolysis of ester groups in poly(MMA-co-DVB) copolymer. It was found that suitable conditions for preparation of carboxylic membranes were: tempe
Nickel transfer and selective transport through weak acid ion-exchange membrane based on poly(vinyl chloride)/poly(methylmethacrylate-co-divinylbenzene) system
โ Scribed by I. Alexandrova; G. Iordanov
- Publisher
- John Wiley and Sons
- Year
- 1996
- Tongue
- English
- Weight
- 290 KB
- Volume
- 60
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
โฆ Synopsis
The transport of nickel and copper through a carboxylic ion-exchange membrane was investigated by using a system containing HC1 as a receiver solution and nickel chloride or copper chloride as a feed solution. The transfer rate was found to be greatly affected by the H+ concentration in the receiver solution and metals concentration in the feed solution. The rate of transfer for nickel was about 60% higher than that of copper under the same experimental conditions (0.5M HCl as a receiver solution, 0.1M feed solution, and 5 h dialysis time).
๐ SIMILAR VOLUMES
The transport of cobalt and zinc through a carboxylic ion-exchange membrane was investigated by using a system containing HCl as a receiver solution and cobalt chloride or zinc chloride as a feed solution. The transfer rate was found to be greatly affected by the H ฯฉ concentration in the receiver so
## SYNOPSIS ('arboxylic exchange membranes were prepared from polyvinyl chloride) /poly(methyl rnethacr~late-co-diviny lbenzene) (PVC) [poly(MMA-co-DVB]. Transport of nickel and copper against a concentration gradient through the membrane was investigated by using a system containing NiClz or CUC1