✦ LIBER ✦

New corrosion monitoring methods taking hold

✍ Scribed by Puyear, Robert B.

Publisher: John Wiley and Sons
Year: 2007
Weight: 702 KB
Volume: 15
Category: Article
ISSN: 0743-5665
DOI: 10.1002/gas.3410150402

No coin nor oath required. For personal study only.

✦ Synopsis

he control of corrosion in oil and gas processing T is a broad subject, covering a vast array of engineering fields and scientific approaches. The cathodic protection specialist who analyzes closeinterval survey data from a 15-year-old pipeline rarely encounters the petroleum engineer who specifies corrosion-resistant alloys for a new subsea platform operation. In today's economy, however, I find that engineers who drastically diverge in technical expertise agree on some general principles of corrosion prevention-the importance of monitoring and risk-based inspection. As my NACE (NACE is the Corrosion Society) colleague Dan Efird, from Enercor International, explains, "The more accurate your corrosion monitoring, the more reliable your risk-based decision."

. . . more accurate your corrosion monitoring, the more reliable your risk-based decision.

📜 SIMILAR VOLUMES

Monitoring Atmospheric corrosion with el

Monitoring Atmospheric corrosion with electrochemical methods in laboratory environment

✍ Doc. Dr.-Ing. M. Metikoš-Huković; Dr.-Ing. C. Zevnik 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 German ⚖ 389 KB

The method of calibration charts for Mon

The method of calibration charts for Monitoring corrosion rates

✍ G. Rocchini 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 German ⚖ 781 KB

## Abstract The definition and meaning of the polarization resistance, after __Bonhöffer__ and __Jena__, are discussed, and its relationship with the corrosion rate is given. The basic mathematical ideas suitable to introduce the method of calibration charts, first proposed by __Skold__ and __Larso

Monitoring pitting-crevice corrosion usi

Monitoring pitting-crevice corrosion using the WBE-noise signatures method

✍ N.N. Aung; Y.-J. Tan 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 385 KB

## Abstract An electrochemically integrated multi‐electrode array namely the wire beam electrode (WBE) and noise signatures analysis have been applied in novel combinations to study crevice corrosion behaviour in the presence of pits. Characteristic electrochemical noise signatures were found to co

Moiré based method for real-time crevice

Moiré based method for real-time crevice corrosion monitoring

✍ M.I. Abdulsalam; T. Shinohara 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 363 KB

A novel real-time technique was developed to monitor localized corrosion occurring over a metal surface. It is an optical method based on the Moire ´technique that has undergone further improvements and fine tuning for more accurate measurements. Upon testing, good agreements were obtained with the

New spectroscopic methods for environmen

New spectroscopic methods for environmental measurement and monitoring

✍ Jeffirey I. Steinfeid 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 583 KB

Resistance monitoring of aluminum plates

Resistance monitoring of aluminum plates to microbiologically influenced corrosion using FFT impedance spectroscopy methods

✍ P. Norouzi; J. Hamedi; M. R. Ganjali; A. Ahmadi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 301 KB

## Abstract It is well know that formation of a passive oxide film on aluminum can enhance its corrosion resistance. However, microbiologically species are able to damage this film. Microbial adhesion is widely accepted as important stage prior to the induction or initiation of biocorrosion. Pseudo